1970 Fiat 500 Abarth 695 ss Gruppo 5 Race Street Car Project Classic Muscle

I have a 1970 Fiat 500 Gruppo 5/Abarth 696ss Corsa race car. It is a project car withmost of the hard work done. It does not look like it, but this car is street legal in Oregon and I have a current Oregon title and current plates. I have done everything I can to make this car light weight - I estimate it weighs about a thousand pounds while the brand new racing motor has about twice the HP of the stock motor. It is a hair over 4' tall and is about 10' long.
These little "monsters" are very quick and are raced extensively in the radically modified "Gruppo 5" class in Italy. I have owned many of these tiny Fiats - the last one was a 5 year restoration project. I have attached a couple of pictures of artist conceptions of how I envision this car to look when finished - two possible paint schemes. Of course, you may have your own ideas.
I have spent alot of time and a ton of money on this little Fiat and have purchased virtually every new part available. The few remaining parts needed can be purchased at a reasonable price. Most of the pieces/components have been pre-fitted and are ready to be bolted on once the car is painted, but there is still more fitting/tinkering to be done. I have installed the racing exhaust, gear shift mechanism and other components including cables. I put fluids in the motor and transmission and have had it running on a temporary gas tank. The fuel cellis now powder coated, so the car could be run on the cell when ready - the fuel lines are plumbed and ready to be attached to the fuel cell. The new brakes have been bled. Iinstalled a new battery. With some minor tweaking, the car could be driven.
Here are the details about the car:(Note: the 12" wheels shown on the car are not included in the sale - the 10" wheels and tires are ready to be bolted on)
* New (not rebuilt) race motor. 650 cc, biggest valves, 40/80/80/40 cam, larger carb. * The race engine was "built"in Europe and Air freighted to Portland!
* New racing intake manifold with an even larger Dellorto FZD side draft carb.
* New alternator.
* New engine shroud components.
* New motor/transmission mount kit.
* New clutch, pressure plate, throw out bearing, etc.
* New (not rebuilt) all syncro 4-speed transaxle with custom gear ratio.
* New larger heavy duty axles.
* New motor/transaxle stiffening bracket - race item. (Powder coated red)
* New racing exhaust- tubes held in with springsto allow quick removal of muffler.
* New front disc brake conversion, new bearings, etc.
* New rear A-Arms with new bearings.
* New rear brake drums and brake shoes.
* New master cylinder and 4 new wheel cylinders
* New Abarth Front transverse spring - stiffer and lowers car.
* New Abarth 19cm rear coil springs - stiffer and lowers car.
* New brake lines
* New fuel line.
* New custom made aluminum 5 gallon fuel cell with all fittings (Powder coated red).
* Customplywood panels to finish off rear seat area - designed to fit around roll bar.
* Customcoverto finish off trunk area - covered in carbon fiber upholstery fabric.
* NewAbarth Corsa instrument cluster - covered in carbon fiber upholstery fabric.
* New dash covered in carbon fiber fabric.
* New Abarth speedometer and new Abarth tachometer.
* New light and lens kit including new rubber gaskets. "smoke" color sport lens.
* New carbon fiber headlight trim rings - beautiful!
* New pair of carbon fiber F-1 style racing side mirrors - stunning and light weight.
* New pair of carbon fiber license plate frame/covers - beautiful!
* New wiring harness.
* New MOMO racing steering wheel - black and red. Beautiful!
* New MOMO shift knob. (Also, new OMP shift knob)
* New OMP racing pedal covers - heavy duty aluminum.
* New Abarth emblems - high quality - beautiful!
* New stainless wheel conversion studs to replace lug bolts.
* New $2000 two piece forged light weight alloy racing wheels - 10" x 6"
* New 205/50/10 low profile tires (4 tires) These are mounted with inner tubes.
* New Abarth finned aluminum high capacity oil sump - raised Abarth letters in red.
* New Abarth finned aluminum valve cover - raised Abarth letters.
* New billet aluminum oil catch can.
* New "made in Italy" custom bucket seats - black with red piping and Abarth logo.
* Custom aluminum side panels for seats - powder coated black with red inserts.
* New matching door panels - black with red diagonal stripes. Abarth logo.
* New matching package tray cover - black with red diagonal stripes. Abarth logo.
* New custom, bolt in 1 3/4" roll bar - professionally welded.Powder coated black.* Race harness mounting tabs welded to roll bar. (See picture)
* New 3" RJS raceharness with mounting hardware - driver and passenger sides. Red.
* New aluminum window trim set.
* New fiberglass fender flares designed to be bolted on. Massive 13cm wide-Gruppo 5.
* New Abarth engine lid props to hold the lid in the open, race position
* All new cables - clutch, choke, hand brake, starter, etc.
* New complete front nose sheet metal - includes new battery tray (Now welded on).
* New front trunk compartment lid.
* New rear engine compartment lid.
* New, custom made aluminum oil cooler housing/bumper -bolts on front of car.
* Custom made aluminum license plate bracket - made to unbolt and remove easily.
* New, custom hand made/formed rear Abarth style bumper.
* New "tow" bracket as used on race cars to tow the car.
* New horn
* Custom made fiberglass functional snorkel for engine cooling.
* New plexi side window kit w/sliding "door" air access - "Superleggera" super light!
* Etc., etc. etc.!!!!!!
This car is being sold as is, where is with no warranty implied or given. What you see in the pictures and what is listed in the description is what you get. I recommend that you schedule a time to come view the car. I reserve the right to end this auction at any time as the car is listed for sale elsewhere. If you have any questions,please contact me through Ebay or you can call me at: 541-968-2588.Thanks Bill