ยป

1966 BARRACUDA PLYMOUTH CUDA

1966 Plymouth Barracuda CUDA

Technical specifications of Plymouth Barracuda 1966

Price: US $19,222.00
Item location: Cape Coral, Florida, United States
Make: Plymouth
Model: Barracuda
Type: Fastback
Trim: CUDA
Year: 1966
Mileage: 500
VIN: BP29B62697759
Color: White
Engine size: 340
Number of cylinders: 8
Transmission: Automatic
Drive type: RWD
Interior color: Black
Vehicle Title: Clear
You are interested? Contact the seller!

Car description

OK GUYS AND GALS... THIS IS MY HOT ROD IN FLAT WHITE PRIMER...PATINA LOOKING 1966 BARRACUDA
COMPLETE STREET LEGAL CAR, IS INSURED AND PLATED..
ALL LIGHTS AND TURN SIGNALS WORK EXCEPT FOR A COUPLE DASH LIGHT BULBS AND THE REVERSE BACK UP LIGHTS.
CAR WAS MADE TO RUN.
ASKING PRICE IS FAR LESS THAN THE PARTS IN IT..
REAL 340 ENGINE .060 OVER SONIC CHECKED BUILT WITH FORGED STEEL CRANK ( BOTTOM END HAS ABOUT 2000 MILES ON IT BROKEN IN WITH BREAK IN OIL THEN SWITCHED TO CONVENTIONAL) NON STROKED REAL 340 MAKING OVER 500 HORSEPOWER
  • . LINKS ON BOTTOM

  • CAM, LIFTERS, HEADS, ROCKERS, WHOLE TOP END IS NEW AND JUST GOT INSTALLED WITH FRESH COMETICS
    TRW FORGED PISTONS 11.7:1 COMPRESSION ALL CYLINDERS HAVE 180 PSI CRANKING COMPRESSION ( PUMP GAS FRIENDLY)
    H BEAM RODS
    ALL ARP BOLTS AND FASTENERS
    COMETIC HEAD GASKETS
    HEADS ARE 6017 69CC CUSTOM EDELBROCK LA HEADS WITH $5,500.00 PUT INTO THEM ALONERYAN AT SHADY DELL ( PLEASE GOOGLE) PORTED THESE TO FLOW 298 CFM WITH GREAT LOW LIFT NUMBERS THEN THE HEADS WERE SENT TO MUSCLE MOTORS FOR 2.08 VALVES AND NEW SPRINGS
    RETAINING THE STOCK INTAKE RUNNER SIZE IT HAS A SUPER VICTOR INTAKE THAT MATCHES.
    BRAND NEW CUSTOM GROUND .605 LIFT HUGHES CAM AND LIFTERS INSTALLED - SOLID ROLLER
    COMP 3/8 PUSHRODS
    COMP CAMS MAGNUM STAINLESS ROLLER ROCKERS 1.5
    WITH HUGHES HOLD DOWNS
    TTI CERAMIC COATED HEADERS DO HAVE RUST UNDERNEATH FROM OIL CHANGES
    CARS HAS ELECTRONIC DUMPS AND BRAND NEW 2 CHAMBER MUFFLERS INSTALLED
    CAR HAS SLIGHT RUST HERE AND THERE BUT IS SOLID AND HAS RAN IN THE 10'S IN THE 1/4 MILE AT 123
    489 CASE 3.23:1 SURE GRIP WITH AFTERMARKET AXLES FROM CASS
    SUPER STOCK SPRINGS
    KYB REAR SHOCKS
    REAR SWAY BAR
    MALLORY 250 PUMP WITH 5/8 FUEL LINE AND 1/2" RETURN INTO
    BRAND NEW STOCK 18 GALLON FUEL TANK WITH SUMP
    WILWOOD DISC BRAKES ON ALL FOUR CORNERS THAT COULD USE A SMALLER MASTER CYLINDER FOR MORE LINE PRESSURE
    NEW HOLLEY 950 HP
    18" WHEELS
    NEW FIRESTONE TIRES UP FRONT
    REAL AUTHENTIC HEMI HOOD SCOOP
    .
    BILLET TAIL SHAFT - FORGED PINION SHAFT
    4" ALUMINUM DRIVE SHAFT WITH LOOP
    COULD USE DRAG RADIALS IN THE REAR AS THESE ARE M & H RACE MASTERS AND THEY ARE NOT GOOD... THIS CAR WILL LIGHT THE TIRES UP FROM 40 MPH ( I WOULD RECOMMEND MICKEY THOMPSON ET STREETS )
    BRAND NEW TRANS WITH 4200 FTI CONVERTER FULL MANUAL VALVE BODY WITH TRANS BRAKE THAT I NEVER USED..I FOOT BRAKED THE CAR IF I WENT TO THE TRACK. - RACE 904 TRANS-
    HAS WELDED SUB FRAME CONNECTORS
    ALUMINUM RADIATOR
    140 AMP ALTERNATOR
    BILLET PULLIES
    BRAND TACH WITH SHIFT LIGHT
    BRAND NEW DIGITAL WIDE BAND FOR TUNING
    FULL INTERIOR NORMAL WEAR
    I WILL POST A VIDEO LINK TO YOUTUBE FROM TODAY MAY 8TH 2019 OTHER PICTURES ARE FROM LAST SUMMER BUT I AM CURRENTLY SANDING THE CAR DOWN TO MAKE IT MORE PATINA LOOKING AND I HAVE SOME NEW DECALS FOR IT THAT I WANT TO PUT ON TO FRESHEN IT UP
    THIS CAR SOUNDS FANTASTIC....
    ALSO I WILL UPDATE PICTURES I JUST HAD TO GET THIS LISTED ON AUCTION..
    https://youtu.be/inQydz_i0J4

    https://youtu.be/LEFJjewqGLk




    More classic cars for sale