1991 Honda CRX SI - tasteful mods

After two years of searching I found this 1991 CRX SI in California and drove it 650 miles to Arizona. Its the last year of the CRX SI model with a factory sunroof, 4 wheel disc brakes, and rear wiper. The sunroof works like new. Its a clean tittle car which is really difficult to find. There are no accidents on the Autocheck report. The previous owner is in his 40's and had the car for 10 years. I'm also in my 40's and never drove the car hard. The motor is the original 1.6 liter D16A6 with the factory 5 speed. Starts up first crank and runs strong. Handles like a go cart. The Transmission does not grind or pop out of gear. The clutch is tight. Has all the original AC components except the condenser fan. The compressor engages but does not blow cold. The previous owner removed the condenser fan when the Mishimoto aluminum radiator was installed. Not sure why. The AC controls work perfect and is not cracked or repaired. Replacement units in this condition sell for up to $600. It runs cool even sitting in heavy traffic on 100 degree days. In the 9 months that I've owned it, I rebuilt the entire suspension (list of components below). I sourced OEM components whenever available. The rear swaybar is intact. I also had the integrated control unit repaired so the intermittent wipers, seatbelt, key and door buzzers work. I bought it with the intention of keeping it forever but life has other plans. So regrettably I'm listing it for sale and hoping it goes to somebody that appreciates it as much I do. My "buy it now" price is what I have invested into the car minus any labor. Currently 140k on the odometer which will go slightly as I still try to drive it whenever possible. I will help coordinate with shipper but buyer must arrange pick up.
I bought the car with the following modifications:

• Skunk2 front upper control arms
• Skunk2 full body adjustable coilovers
• Skunk2 rear lower control arms
• Skunk2 rear camber kit
• Skunk2 shifter
  
• Mishimoto aluminum radiator
• Rear frame brace
• Front strut tower brace
• DC ceramic coated header
• Custom exhaust with a Borla muffler
  
• AEM intake
• Rota Slipstream wheels
• New Falken Zeix tires
  
• Goodridge stainless steel brake lines
  
• Aftermarket power windows
• Aftermarket power door locks
• Viper alarm

I did the following items:

• New Interstate battery
• New Denso alternator
• New ignition switch wiring harness
  
• New platinum tip spark plugs
• Replaced the oil pan gasket and filled with Mobil1 Synthetic
  
• New wheel bearings on all 4
  
• New tie rod ends
  
• New ARP wheel studs (will include OEM wheel studs for restoration)
• New steering rack (will include OEM Honda rack for restoration)
• New polyurethane steering rack bushings
  
• New front lower control arms (will include OEM pieces still in great shape)
• New lower ball joints
• New upper Skunk2 ball joints
• New Honda trailing arm bushings
• New spindle nuts and caps on all 4
• New lug nuts
• New wheel seals on all 4
  
• Polyurethane swaybar bushings
• Alignment with 1 year warranty till 3/17/18
• New LED bulbs in the dash
• New LED headlight bulbs
• New fuel filter
• Drained and refilled transmission oil
• New battery ground cables

I have receipts for the suspension components. The car also has its original owners manual in the glovebox. I hold a clean and clear box "A" Arizona tittle for the vehicle. Please understand that the car is almost 30 years old. Although I consider it's in great overall condition for its age, it does shows signs of wear typical for a CRX. There are dings and the paint is not in perfect shape. There is a small dent on the front of the hood. Looks like something was kicked up on the California freeway. There is also a tear on drivers seat which I covered with black tape to prevent further damage. Plus some damage on the rear of the door panels from the seat belts. In the time I've owned the CRX, I've also collected many spare parts that I think might be difficult to find. I'm willing to sell those in addition, but some of those parts are body panels that will need to picked up or crated for shipment.