Custom Built 1956 ford F100, 351W Auto, Needs Finishing, 100% Complete
1956 Ford F-100
Technical specifications of Ford F-100 1956 | |
|---|---|
| Price: | US $37,800.00 |
| Item location: | Joplin, Missouri, United States |
| Make: | Ford |
| Model: | F-100 |
| Type: | Standard Cab Pickup |
| Year: | 1956 |
| Mileage: | 2 |
| VIN: | F10V6R13397 |
| Color: | Buff |
| Engine size: | 351W |
| Number of cylinders: | 8 |
| Power options: | power steering, power brakes, Air Conditioning |
| Fuel: | Gasoline |
| Transmission: | Automatic |
| Drive type: | RWD |
| Drive side: | Left-hand drive |
| Options: | 4 wheel disc brakes |
| Vehicle Title: | Clear |
| You are interested? | Contact the seller! |
Car description |
|---|
Have you been looking for one of these rare trucks but just couldn't find the color you wanted ?Well here's your chance to finish this one in the paint color and interior of your choice. The rest of the work has been done.
This is pretty much a brand new 1956 Ford F100 original (not aftermarket) big back window. Custom all steel dash. All seems have been welded and smoothed. An amazing amount of time and effort has went into getting this truck straight and right with slight and subtle customizing. Extremely straight body and absolutely rust free. It is in buff primer now. Cab has new mounts and undercoating. This truck starts, runs, drives and stops but isn't ready for the road just yet.
Rebuilt stock 1969 351W Ford engine (casting number OU160191) with polished Billet Specialties Serpentine system, MSD ignition, high torque mini starter, Edelbrock 4 barrel carb and Edelbrock AirGap intake. This engine sounds and runs great.FMX 3 speed automatic transmission, Colorado custom performance drive shaft
Frame has been smoothed and powder coated, frame has never been cut or chopped other than a small, nicely done C-notch over the rear axleFord 9 inch housing powder coated with Speedway Positrac 3.00 gear ratio 28 spline axles
Heidts 4 link rear suspension with QA adjustable coil over shock absorbersHeidts Mustang 2 front suspension power rack and pinion with QA adjustable coil over shock absorbersCeramic coated headers, 2.5" stainless steel Magnaflow exhaust systemNew drilled and slotted rotors, power 4 wheel disc brakes
New Front wheels are American Racing 18x7 withPirelli Scorpion 235/55R18XL tiresNew Rear wheels are American Racing 20x10 withPirelli Scorpion 285/50R20XL tires
New under bed 15 gallon aluminum fuel tank with internal electric fuel pumpNew front and rear bumpers and brackets
All New bed with stake pockets welded and smoothed, oak wood with 3 coats of Spar urethane varnish, polished bed stripsNew 3" wider rear fendersNew front turn signals (white lenses, 2 complete sets)
New halo LED headlightsNew battery and battery box under floor as original was mounted
All new polished stainless bolt kits for front end and rear fendersNew 1 piece door glass kit & felt kit (wing windows eliminated)New back glass & rubber gasketNew windshield & rubber gasket
New complete wiring harnessNew chrome "Ford" tail lightsNew tail gate, chrome tail gate hinges and stainless hidden latches
New original style aluminum radiator with electric cooling fanNew Vintage Air AC/heat system (fitted under dash brackets) with Streamline Pro Climate Control Panel 3 knobsNew from Mid-Fifty, Need all, wiper intermittent and motor, linkages, pivots, arms, blades, complete windshield wiper kitNew Ididit tilt steering column with column shifterNew Dolphin gauge cluster
100 sq ft of FatMat sound insulation, (enough to completely insulate 2 cabs)New mirrors inside and outNOS exterior door handles (Yes, NOS)New door hinges
New billet interior door handles and window crank handlesNew door locks/keysNew door latch assembliesNew polished door strikers
New kick panels with provisions for 6" speakersNew gray sun visorsNew billet steering wheel with 1 each grey and black half wrapNew polished stainless carpet keepers or sill plates (2 sets, one wide, one narrow) you get bothNew Billet Specialties aluminum A/C dash vent bezelsNew VIN plate from MartiAutoWorksNew rubber fender welting front and rear
New running boards with 2.5 inches extensions added to eliminate the gap that usually takes an ugly rubber piece between them and the cab. Custom 1/2"stainless steel running board strips.
This truck is 100% complete. I have the original seat but it does need restored. I have the original headliner with bows. Also have fender braces, some extra parts too. I'm sure I've left out some things and some things I have duplicates of. There's boxes and boxes of parts and you will get every part to this truck and more. Check the pictures and if you don't see a part just ask.
I purchased this truck about 2 years ago right here on Ebay. It was previously a 12 year project of a body shop owner in Aurora Colorado. So it has been stored inside for the last 14 years.
You won't find another truck like this. It is extremely straight and ready for your favorite color of paint and your personal interior. These trucks weigh about the same as a mustang so this truck should drive like a sports car.
This is my truck, titled and tagged in my name, I have an address in Oklahoma. Some people have two residents, like me. I know it's scary to buy something like this on Ebay. This truck is what I have described. This truck is in my garage near Jolpin Missouri.
I'm selling this truck because life gets in the way and as usual, priorities change. I will consider any and all offers.
I will assist with shipping in any way I can to make sure you receive this truck in good condition and as quickly as possible.
I have now loaded every part that is listed on this add and more into the bed of this truck. It will be wrapped in plastic and tarps to keep everything dry if open trailer shipping is used. It starts right up (sounds awesome) with the key switch. The brakes work.It is ready for shipping.
Please ask any questions you may have and I will answer them the best I can. If you can, I would recommend that you come see this truck in person. Or call a reputable person or body shop in the Joplin area and have them come and see it for you.
I've had a couple of questions about the products used to do body work on this truck. Evercoat Rage Ultra body filler and the primer is MarHyde Ultimate 2K Urethane Primer.
Sorry that I didn't take many pictures of when I first got the truck about 2 years ago.
Thanks for looking.
On May-31-19 at 16:33:33 PDT, seller added the following information:I've had some questions about the big back window. There were only 6,200 of these produced in 1956 and this is one of them. This cab and/or frame has never been cut, chopped or spliced in any way. There is also not one single tiny spot of rust anywhere on this truck. I hope that helps. Thanks to everyone with the good questions.
Custom Built 1956 ford F100, 351W Auto, Needs Finishing
1956 Ford F100 351W V8! C6 Auto! Dual Glass Packs!
Custom Built 1956 ford F100
FORD F100 351W/AUTO
1956 Ford F100 F-100 Pickup Custom 396 Auto
Ford f100 351w auto duel fuel lwb canopy