1964 1/2 Ford Mustang EFI Project

This is a 1964 1/2 Mustang I have owned this for 15 years. I did not perform the work on the Mustang and am describing the best of my ability.
It was swapped to a 5.0 EFI out of a 1986 GT Hatchback Mustang about 7 years ago. The trans is out of the same 86 Mustang, and a custom driveshaft was made for the Mustang. It also has a Blue Dakota Digital Gauges, and B&M shifter. All metal appears to be original except for the lower front valance, which I purchased because it was missing. The body is straight with minor dents and scratches. Also minor typical cancer at rear quarter panels (Each side has a small section that is 1/2”x2”). Has drum brakes that were on it when I purchased the car. Exhaust is long tube headers into a 2.5" stainless steel dual manga flow exhaust which runs over the rear axle and is hidden from view. This is a project that needs more work. Interior needs some attention as it has been sitting for so many years, and has some tears at the stitching and head liner is starting to come undone.
THIS CAR HAS TO BE TOWED!!! It is registered with a clear title and current tags. It starts and runs, but without lights, and new brakes it will have to be towed.
SOLD AS IS!!!
The VIN for this car means:5=United States, F=Dearborn, Michigan, 07=Hardtop, D=Optional 289 Ci V8, 204,387=production number.