1979 Ford Ranger F250 Modified 4x4 Pulling truck. 400m-351c-C6-Dana 60-460

1979 Ford F-250

Technical specifications of Ford F-250 1979

Price: -
Condition: Used
Item location: Mercersburg, Pennsylvania, United States
Make: Ford
Model: F-250
Year: 1979
Color: Medium Silver Frost metallic
Fuel: Racing gasoline
Transmission: C-6 automatic
Drive type: 4WD
Options: 4-Wheel Drive
Vehicle Title: Salvage
You are interested? Contact the seller!

Car description

Selling my Fordpulling truck. Highly modified. Not streetable as is. NO title. NO warranty. Buying as is. Selling for numerous reasons. Runs strong. A 460 will set in and bolt up to trans.

1. 400m short block. Bored .030 over, 06 cu. in.. block filled. stock crank and rods. ARP rod bolts.motor fully balanced

1A. Motor has ARP studs and bolt through out.

1B. Has custom JE forged light weight pistons. Calculated 14.8-1 compression with these heads.

2. 1970 351c closed chamber heads with S.S. 2.25" int and 1.94" exh valves

3. mechanical roller cam and lifters

4. ARP 7/16" rocker studs, /8" comp 1 pc push rods and guide plates

5. Harland Sharpe roller rockers

6. Jomar stud girdles

7. Ford Racing valve covers

8. Edelbrock intake

9. MSD ignition. 6A box. coil

10. Holley 950 HPgas carb

11. alum. radiator

12. Hilborn belt drivefuel pump. gas or alcohol

13. Moroso single stage external oil pump. belt drive. adjustable pressure

14. electric belt drive to w.p motor.

15. Ford Racing valve covers

16. Milodon deep sump oil pan

17. Custom built vertical headers

18. MSD plug wires

19. SFI flywheel, xternal flywheel shield and SFI trans blanket

20. 1 yr old fresh built C6 . Race built. TCI manual reverse valve body. New 3800 stall convertor with balloon plate. Additional external trans filter and cooler

21. Custom built and balanced drive shafts

22. Front Dana 60, ull spool, 5 spline inner axles

23. rear Ford Sterling with 35 spline axles

24. Front brakes only. Wilwood master cylinder and front Wilwoodlight weight calipers.

25. 208 transfer case

26. Custom "REAL" wheels on 31x15.5x15 Dick Cepek Pullers

27. Electric over hydraulic steering. Almost new custom built pump motor asy with oversize resovoir and adjustable pressure relief.

28. dual 1000 cca batteries for start

29. 100 amp 1 wire alternator

30. separate 850 cca battery for steering.

31. kill switch and rear adj. hitch

32. B&M shifter with shifter activated neutral start and activated back up lights

33. all safety loops and equip

34. cab has all glass and seals. wind up door windows

35. pop off steering wheel.

36. Auto meter play back tack.

37. "MOON" 7 gal. fuel tank

38. Peterson fuel filter

39. System 1 oil filter

40. Most all lines are steel braided

41. new bed sides when truck built.

Truck never dynode. Estimated 600 hp + on gas and 650 + on alcohol. Runs about 7000 rpm and has modified internal oiling system.Truck is not perfect on body. Has minor dents and dings on cab. Cab, enders and hood and frame is original. Frame was sand blasted and painted Rustoleum black. Selling with NO weights.

Selling as i, o warranty, o title. I never had a title. Do have original vin #.

Truck pulled in a 4500 lb class with driver and some added weight. In excellent condition, uns strong and ready to go. Any questions email me or call 717-816-2806 evenings

$500 deposit to Paypal when buy now with balance due at pick up in cash or certified bank check. NO PERSONAL CHECKS ACCEPTED. Thanks.

Must contact me within2 days of buy now to arrange pick up time.

15

More classic cars for sale