1970 Dodge Super Bee 383 Magnum Automatic EK2 Go Mango Coupe Numers Matching

1970Super BeeNumber's MatchingGO MANGO

This is a great project car to start with. It is 1 of 1710 made with the 383/automatic. It has the original engine and transmission. It does run and will go in gear but is NOT a driver. This car needs complete restoration, but is pretty complete. The best parts are the color and that it's a coupe (WM21). It's not a heavily optioned car from what I can tell. The original fender tag is there but in really bad, almost unreadable condition. Below is a breakdown of what I could decipher.

• Original numbers matching engine. Missing original valve covers, distributor, intake and exhaust manifolds, carburetor.
• Original transmission
• Original radiator and fan shroud
• Original rear end 8 3/4 3.23:1 open
• Original dash with VIN. Would clean up nice and hasn't been cut. Original radio still in place.
• Original Seats.

Needs:

• Trunk Pan Full
• Trunk Floor extensions.
• Right Quarter lower patch and several small patches due to rust.
• Left small patches but overall, very solid and usable.
• Main floor
• Roof Skin
• Dutchman Panel

EK2 J25 M21 ??? V6WEK2 HK24 FK5 616 261097(?)E63 D32 WM21 N0G 245225
This is just an educated guess at sheet metal replacement without dipping the car to bare metal. The frame rails looked great, both front and rear. Also, the date plate is severely rusted so it's hard to make out the numbers. I did my best but it's no guarantee. I think if you take the tag off you might be able to read it slightly better.
If you have questions, please ask.