1937 chevrolet truck, rat rod, street rod, cab, chassis, fenders.

This is not mine but listing for a friend. Look like the project whereas the cab been channeled to sit lower. front radiator - looks new but has a few cooler fins bent they real soft metal(just needs a rad comb to dress it back) - and the rad brace lower to match the cab. has a mustang 2 front suspension. no spring yet. boxed frame front to back. with I think a 10 bolt rear end. Engine is not been investigated nor the transmission but both are in. if you not want or need I can remove engine and trans and credit back 150. 00. There no trans mount. Has seats with console. not bolted in yet. from unknown donor. look like the door bottom been replaced. the windshield crank out is been replaced with another one as the old one was removed do to non functioning. Don't see the rocker piece under the drivers door. passenger look to been already installed. there looks like the window crank on passenger side is in with the driver's side lying on the floor. Also look to be two window garnishes to finish out the passenger door windows - and both door garnishes look good. Not see the inner bottom door panels covers. The front wheels hold air but the back one are mine and don't actually match the 4. 75 pattern AND ARE NO INCLUDED. Will sale separately but note the rims are 5. 5 pattern and have wrong backsplash they spare tire rims. high positive. but think they may do in a pinch for roll around and if bed panel off do to high positive backsplash - they rub bed panels. Have the two crap ones that were on back but the tires wont hold air. The driver front fender may be from a 1937 car versus truck as the running board does not line up on about a 1-2 inches. Looking at the passenger side the wheel opening looks to cut down more behind the wheel (smaller wheel opening) and 1-2inches more forward on the running board. See the left front pic. The running board kicks forward 1-2 inches. that where it does not have fender portion to connect to. Driver looks to sweep back further at the bottom behind tire where it mount to the running board. This only affect the outside lip diameter of the back lower fender. not the rest of the mounting to the running board. So to say one could add metal 1-2 inches to the lower back outer lip of the fender and then it would be like the other side. maybe some one can correct me that know these thing. and I will update listing. Or cut the other side back to match the left. New but been in storage smooth running boards made for left and right. I some what mounted the right side to see which fender are right to the boards and the passenger matches up hence I think the driver one a car fender. Usable but need modification. Other running board under truck then setting on frame. Also has new fiberglass front radiator shell. There not been any new supports made for the running boards. and the whole thing just sitting with nothing lined up. Have wood block under the running boards in the pics. And now rope holding it together so I can move it around. I just placed part loosely together to get an idea of the truck. Lot of work to repair and fix it up but would be nice. Sit real cool and low. The bed sides - better to order replacements - they scrape. rear fenders need lots of work or fiberglass replacements. Fronts fenders need work as well or fiberglass replacements but not as bad as the backs. Or rat rod it and leave the fenders off. It has a fuel cell in the rear. look to be new. and the steering wheel/column - unknown donor - is in place with a column mount and floor mount. Also has the trim piece for the brake and a spoon pedal. Looks like a power rack and pinion for steering and is already u-joint and shafted to the steering column. No glass upper hinge for the window. nbsp;Way more in work done and parts than what is being asked. As is. No title. only bill of sale. nbsp;500. 00 non refundable deposit. Can store for some time. let me know what you need. might be a small charge if go to long. And. likely the owner will want the whole amount at some point. Buyer responsible for shipping. shipping cost. and responsibly of shippers.