Replaces Part # T1240868 on Triumph bikes 1993 - 2018

This listing is for an *UPGRADED*CHROME-PLATED,SOLID BRASS FUELCOUPLER with STAINLESS STEEL valve spring, pin and latch, and featuresVITON o-rings (Viton is much longer lasting than rubber o-rings which would break down from fuel & oil).This coupler is made from the same manufacturer "CPC" which made the original OEM plastic connector. The original plastic fuel line couplers are infamous to snapping off when moving the gas tank with the fuel lines attached. There are two of these threaded connectors side-by-side on most of the Triumph fuel tanks.Some bikes only take one of this THREADED style AND one of the IN-LINE style. I have listings for both styles. Be sure to purchase two metal couplers and replace both female couplersof your style (you will sleep much better knowing that both have been replaced). So if you still have the original plastic couplers, here is your chance to easily get a superb quality *ALL-METAL* direct replacement! Alternatively, you could go to the dealer and spend the $30+ on getting another OEM plastic coupler, but they will snap again and again unlike these that will last a lifetime!
My couplers directly replace the original plastic fuel line connector (A.K.A. quick connect / disconnect, dry break, coupler, coupling ) for the following models & years:(If any of my information below appears to be incorrect, or you purchase this item for a model listed below and it doesn't fit, please contact me so I can fix my list. I offer full refund and return shipping for this scenario).
DAYTONA 595 (1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006)DAYTONA 600 (2002, 2003, 2004, 2005)DAYTONA 650 (2002, 2003, 2004, 2005)DAYTONA955i (1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006)SPEED FOUR (2002, 2003, 2004, 2005)SPEED TRIPLE 885i (T309 / T509) (EFI) (1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006)SPEED TRIPLE 955i (EFI) (1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,)SPEED TRIPLE 1050 (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 / Present)SPRINT RS (1999, 2000, 2001, 2002, 2003, 2004)SPRINT ST (1999, 2000, 2001, 2002, 2003, 2004)TIGER 885i (1993, 1994, 1995, 1996, 1997, 1998, 1999)TIGER 955 (2001, 2002, 2003, 2004, 2005, 2006, 2007)TT600 (2000, 2001, 2002, 2003)
For any questions at all, please message me. I have used these myself and love them. I recommend putting RTV sealant on the threads to seal them when installing, which also helps prevent the possibility of over-torquing the coupler in fear of a leak.
If you are having trouble removing a broken plastic coupler, trying using an "easy-out/screw extractor". You may have to cut down the screw extractor's tip to fit snugly, as the threaded hole on the fuel tank may be too shallow if the screw extractor is too small/long.
The pictures above show an original OEM plastic connector that this metal one will replace. There is also a picture of a typical situation when replacing one of the OEM plastic couplers. The tip on the screw extractor shown in the picture was cut off to fit far enough into the hole for gripping the inside of the broken connector.
Have fun!