Toyota 4Runner solid axle swap, 7mge engine swap, locker, winch - SAS crawler

For sale is a PROJECT 4Runner with lots of potential! This WAS running and driving before blowing the 22re engine, so the drive-train and suspension are all installed and "tested". Is currently NOT running and will need to be towed.
The 7mge from a Toyota Supra has 199hp and 188ft-lbs of torque compared to the 112hp and 142ft-lbs of torque produced by the stock 22re. This will be a huge improvement in power while retaining Toyota reliability!
Features:
-Converted from IFS to a solid axle with 5.29 gears and Aussie locker
-7mge engine swap from Toyota Supra - swap needs completed but is bolted in
-Smittybilt XRC8 electric winch (almost new - only used to move 4Runner in driveway)
-Custom front winch bumper
-Rock sliders
-35" Goodyear MT/R tires with full size spare - more than 1/2 tread still
-High clearance fiberglass front fenders
-Additional trussing on the front axle
-Cross over high steering
-Vented front disc brake upgrade
-Front springs are 4 inch Trail Gear lift with longer shackles.
-Rear springs are Chevy 63" with longer shackles.
-U-bolt flip kit
-Bilstein shocks
-Reinforced raised front shock hoops
-Rear 2" receiver hitch
-Custom rear driveshaft with CV
Extras included:
-Grill is included (not pictured)
-Replacement headlights that utilize H4 bulbs
-ECU for manual transmission and automatic transmission included (wiring harness for automatic)
-Several manuals, wiring diagrams, etc for both the 7mge *Supra) and the 22re (4Runner)-V6 radiator

What needs completed (list may not be complete):
-Radiator installed and hoses connected
-Wiring harness connected for 7mge
-Exhaust completed for engine swap
-Clutch master cylinder bled
-Driveshafts re-installed