1986 Porsche 944 Renegade Hybrid V8 Engine Swap
1986 Porsche 944
Technical specifications of Porsche 944 1986 | |
|---|---|
| Price: | US $11,500.00 |
| Condition: | Used |
| Item location: | Princeton, New Jersey, United States |
| Make: | Porsche |
| Model: | 944 |
| Year: | 1986 |
| Mileage: | 1000 |
| VIN: | WP0AA0946GN455973 |
| Engine size: | 5.7L V8 LT-1 |
| Vehicle Title: | Clear |
| You are interested? | Contact the seller! |
Car description |
|---|
This is a Renegade Hybrids Porsche 944 with a Chevrolet LT-1 5.7L V8 engine swap (www.renegadehybrids.com).
This car was built for >$30,000 and a list of all the modifications and upgrades is shown below. The car has nearly 400HP at the crank, putting ~350HP to the wheels (dyno shown in the pictures). Porsche 944 Turbo brakes and a Turbo 951 manual transmission with a limited slip differential are installed to handle the significant power upgrade. Has a high performance cam and heads, forged pistons and rods, ceramic coated headers, and custom high cooling radiator. I have most of the receipts from the build.
The car is also fitted with Sparco sports seats, a half roll cage, and a 5-point harness in addition to the standard seat belts.
<1,000 miles on the new engine install. 160,000 miles on the original car. Paint faded in spots and some dings in the sheetmetal (see photos).
Fully street legal and great if you're looking for a fun, inexpensive track car!
This car was built for >$30,000 and a list of all the modifications and upgrades is shown below. The car has nearly 400HP at the crank, putting ~350HP to the wheels (dyno shown in the pictures). Porsche 944 Turbo brakes and a Turbo 951 manual transmission with a limited slip differential are installed to handle the significant power upgrade. Has a high performance cam and heads, forged pistons and rods, ceramic coated headers, and custom high cooling radiator. I have most of the receipts from the build.
The car is also fitted with Sparco sports seats, a half roll cage, and a 5-point harness in addition to the standard seat belts.
<1,000 miles on the new engine install. 160,000 miles on the original car. Paint faded in spots and some dings in the sheetmetal (see photos).
Fully street legal and great if you're looking for a fun, inexpensive track car!
| Part Name | Part # |
| engine | 1994 Chevrolet LT-1 |
| A/C compressor | Delphi CS0111 |
| air filter | K&N RF-1035 |
| Air inlet elbow | Trick Flow Specialties TFS-3150801 |
| alternator | 7801-7N |
| belt tensioner (automatic) | Dayco 89232 |
| camshaft | Crower 00563 LT1 (grind# 277HR286) |
| catalytic converter | Thunderbolt Metallic Cat Converter 415250 |
| clutch aligning tool | KD Tools 2420 |
| crank sensor | # 10456534 |
| cylinder head bolts | ARP 134-3601 |
| cylinder heads | Jeg's High Performance Head 180cc LT-1 SBC |
| distributor | NAL-1104032 Optispark I |
| engine oil pressure switch | Standard Motor Products PS236 |
| fuel filter | WIX 33238 |
| fuel injection hoses | Dayco 80090 |
| fuel pressure regulator | Aeromotive 13107 |
| fuse block | Cole Hersee 46377-8 |
| headers | Renegade Hybrids 944 LT1 ceramic coated |
| heater hose | Dayco 80317 |
| hydraulic roller valve lifters | COMP Cams 875-16 |
| ignition coil | Standard Motor Ignition Coil DR49 |
| ignition control module | Standard Motor Products LX381 |
| ignition wires | MSD-32149 |
| injectors | Accel#150830 (30 lbs/hr) |
| intake air temp sensor | Standard Motor Products AX32 |
| intake manifold bolts | ARP 434-2101 |
| knock sensor | Standard Motor Products KS2 |
| MAP sensor | Standard Motor AS5 |
| mass air flow sensor (MAF) | 213-353 |
| mass air flow sensor (MAF) | Granatelli GRN-350111 |
| mass air flow sensor (MAF) | Granatelli GRN-350111-C |
| muffler | Magnaflow 11229 |
| oxygen sensor | Delphi ES10006 |
| PCV Valve | CV895C |
| power steering hose field assembly | Edelmann 24003 |
| power steering pump | Cardone 20-981 |
| pushrods | COMP Cams 7608-16 |
| radiator | Ron Davis |
| radiator hose | Dayco 71576 |
| radiator hose | Dayco 71194 |
| rods | 6 inch I-beam |
| roll cage | 1/2 cage for track or street use |
| seats | Sparco |
| seatbelt | 5 point harness in addition to standard seatbelts |
| serpentine belt | Dayco 5060620 |
| shocks | Koni adjustable |
| starter | Renegade Hybrids high torque light weight 102 starter |
| upper strut mounts | KLA industries aluminum upper strut mounts |
| throttle body (58mm) | BBK Performance 1554 |
| transmission | porsche 944 turbo 951 manual LSD |
| water pump | NAL-12527741 |
| valve cover gaskets | Summit racing SUM-G2301 |
| short shifter and shift linkage | only944.com |
1986 Porsche 944 Renegade Hybrid V8 Engine Swap (more pics added!)
1986 Porsche 944 turbo Hybrid V8 LS1 swap LSX conversion
PORSCHE 914 RENEGADE HYBRID
1986 Porsche 911 Carrera RSR Tribute with LS Renegade swap
1976 Porsche 911 S Coupe 2-Door V8 Renegade Hybrid 400 HP
1976 PORSCHE 914 - 8 LS1 CORVETTE V8 RENEGADE HYBRID CONVERSION BIG $$