Porsche 911 Carrera 4 Cabriolet (964) 1991 Manual

Porsche 911 Carrera 4 Cabriolet (964) 1991 Manual

Circumstances force me to sell my much loved and well looked after 964 - I have owned this car since 2001. I am just not in a position to enjoy it any more. Clean Texas Title. Huge amount of money spent on this car, ncluding $30k since 12/2012. A very special 964, he last of the handbuilt 911's.I have been a member of Rennlist since early 2002, ssentially the history of my ownership of this car is in the archives there! Also PCA Maverick Region Member for many years.

Overview

• VIN WP0CB2964MS461383

• Clear Texas Title

• Mileage now: 78461

• Rust free Texas Car One owner since 5/7/2001 at 60874 miles 2 prior owners.

• Jim Ellis, tlanta delivered car on 09/04/1991 then in Texas from 1994 to 2002 and then 2003 to date. I spent 2002 and 2003 in Detroit, he car was a pure garage queen, oming out only on the 2-3 days a year Michigan had dry weather and sunshine!

• Rebuilt engine, 24,877.19 by Porsche expert, ebuilt less than 2000 miles ago 12/2012 - full details below

• Additional recent spend of $4600

• Comes with files of full service history, wners manuals and warranty books

Original Option Codes

• Paint L92E LT

• CO2 - Catalytic Converter

• 158 - Radio Monterey {note replaced with Sony iPod unit}

• 437 - Comfort Seat Left (replaced with 993 comfort seats - see below)

• 454 - Automatic Speed Control

• 494 - 2 speakers on back

• 494 - Amplifier System

Mileage

• Note speedo change 11/2003 - old one had the peeling was changed at 69990. New one had 543 miles on it when replaced.

• So total is 69990+9014 less 543 =78461

Interior

• ATIWE GT Sport steering wheel (same as RUF) w/airbag & Porsche Crest

• Replaced Tachometer with Computer one and replaced 3 stalk unit with 4 stalk unit

• New 993 clock

• Footmats embroidered with Porsche Crest

• 993 Turbo black leather seats with embossed Porsche Logo - driver is 8 way way electric (new switch this year) passenger is 4 way electric

• Windstop

• Replaced door seals

• Wired for radar detector

• Aluminum and stainless steel trim parts -

o Bezel

o A/C switches

o Type 911 UK Gear Knob and leather boot

o Type 911 UK Alloy handbrake grip

o Door locking knobs

o Rennline pedals and dead pedal

• Leather door inserts

• Sony iPod/radio

• Bird Storage Armrest & Cupholder

• Inventiva Concepts AIR-1 Cupholder under passenger seat

• Full Porsche Toolkit

• Drivers Manual

• Porsche Badged door steps

Bodywork

• Replaced convertible top - Cox's Auto Trim and Upholstery - Fort Worth

• Hood is set for manual lift and auto latching -the common mod on this model, llowing for manual lifting and avoiding the risk of the electrical motors breaking the frame. The electrical motors were working fine when I made this mod in around 2003.

• Tonneau cover.

• 993 rear brake basket handle replacing 964 periscope

• 993 AERO side mirrors

• AJ USA shock tower brace

• Headlights replaced with H4's and bezel painted to match car and headlight film on each

• Front RSR 2 piece splitters from from Rennspeed

• Porsche bumper plugs

• Replaced rear blinkers and Porsche name strip

• Full tool kit

• Front blinkers replaced with Euro Clears

• 17" Porsche Boxster Turbo wheels

• Painted Porsche Wheel Inserts

• Seat rail adjusted for tall drivers

Running Gear

• Roock Suspension - Euro 964RS ride height

• Replaced steering rack with rebuilt one in 2009, new tie rods etc.

• Porsche 964 RS brake upgrade - red calipers, raker rotors, oses, ads, lso rear parking brake shoes

o 964RS Calipers in red

o Rotors

o Front caliper adapters with fittings

• Axle boots replaced and CV joints

• 17 in Porsche Boxster wheels

• 17 in Spacesaver

• Tires: Goodrich G Force Sports - 255/40/17 rear, 05/50/17 front - less than 3k miles on them (installed at 6007 miles)

AirCon

• Converted to run on R134a

• Serviced and recharged this summer. Runs cold. Even in Texas.

• New compressor, ondenser, rier, xpansion valve 10/2000

Engine

• Rebuild with Pauter Rods by Buckley Racing:

Part Description:

Part number

Qty

Oil pump - OE 964

96410701111

1

Exhaust studs

5

Upper end gasket kit

96410090200

1

Engine lower gasket set

93010090104

1

Head gaskets

96410411520

6

Exhaust nuts

99908405202

8

Rocker shaft seals

91109910352

24

Oil return tubes

90110735101

4

Main bearings - OE

96410190100

1

#8 nose bearing

96410113801

1

Jerry Woods rod bearings

112333

1

Intermediate shaft bearings - front

99613143570

2

Intermediate shaft bearings - rear

99610113780

2

Timing chains

99310552900

2

Chain guide rails

96410504302

2

Flywheel bolts

92810215101

9

Air filter

96411032701

1

Oil Filter

OC54

1

Oil line, -stat to oil filter console

96420725214

1

Oil line, ngine to oil filter console

96420725407

1

Spark Plugs - Bosch

99917018390

12

Distributor caps

93060291901

2

Distributor rotors

93060290202

2

Alternator and fan belts

99919233850

2

Fuel Filter - KL21

92811025306

1

Engine sound pad

96455628101

1

Rocker molding clips

99959191640

3

Brad Penn 20W50 Oil - 13 Qts - break in

13

Brad Penn 20W50 Oil - initial oil change

12

Valve cover gasket set

PK-03

1

Shop supplies, ealants, asteners, isc.

1

Fuse box cover

96461002200

1

Engine tin screws

99914300408

8

Plastic nuts for under tray

99904900740

8

Accelerator cable grommet

1

Air box

96411003005

1

Engine reference sensor

99660610501

1

Allen head screws for fan pulley

90011902602

3

Dual mass flywheel - LUK

96411401202

1

Clutch kit

96411691101

1

Clutch lever update kit.

101518090

1

Guide tube

95011681306

1

Clutch bolts

99911901701

9

Lower valve covers - billet

Haggert

1

upper valve covers - billet

Haggert

1

Mahle Pistons and cylinders

3.6 liter

1

Pauter rods - 4130

PAUT964

1

Valve guides

12

Fan pulley shims

96410651701

2

Motul 300 synthetic gear oil

1

Relay Connector body - eng. Fuse box

1

Oil line butterfly brackets

96420730300

2

Plugs for rear engine tin access holes

96410623701

2

Plugs for torque tube access holes

99970323340

2

Battery - Optima

1

Used heat shielding for catalytic converter

1

• Full check up, il change, nd valve adjustment in May 2015

• Cup Bypass

To do's

• Front bonnet needs new strut

• Slight undersurface crackle on front bumper cracking under the surface - tried to catch it in photos - it is hard to see in most light.

• Recently replaced gear linkage joint - shifting is like a new one: stiff!

BiBigger versions of pictures

[IMG]http://i67.tinypic.com/2ch3tar.jpg[/IMG]

[IMG]http://i66.tinypic.com/23shd2w.jpg[/IMG]

[IMG]http://i66.tinypic.com/2ive0qf.jpg[/IMG]

[IMG]http://i67.tinypic.com/2w30s2d.jpg[/IMG]

[IMG]http://i65.tinypic.com/r7uagi.jpg[/IMG]

[IMG]http://i68.tinypic.com/2nusx6u.jpg[/IMG]

[IMG]http://i65.tinypic.com/28jy2j6.jpg[/IMG]

[IMG]http://i64.tinypic.com/2qle35t.jpg[/IMG]

[IMG]http://i68.tinypic.com/16ic9j.jpg[/IMG]

[IMG]http://i66.tinypic.com/9bawko.jpg[/IMG]

[IMG]http://i66.tinypic.com/vdwzk.jpg[/IMG]

[IMG]http://i67.tinypic.com/2iurh8o.jpg[/IMG]

[IMG]http://i68.tinypic.com/i5ojuc.jpg[/IMG]

[IMG]http://i67.tinypic.com/2ni15qg.jpg[/IMG]

[IMG]http://i65.tinypic.com/f3tfgx.jpg[/IMG]

[IMG]http://i66.tinypic.com/345zbf7.jpg[/IMG]

[IMG]http://i63.tinypic.com/6ymw49.jpg[/IMG]

[IMG]http://i65.tinypic.com/2qtycgk.jpg[/IMG]

[IMG]http://i65.tinypic.com/103cxti.jpg[/IMG]

[IMG]http://i64.tinypic.com/rhj3m1.jpg[/IMG]

[IMG]http://i65.tinypic.com/357po2b.jpg[/IMG]

[IMG]http://i63.tinypic.com/256tzph.jpg[/IMG]

[IMG]http://i64.tinypic.com/291c482.jpg[/IMG]