1992 Jeep Wrangler V8 Supercharged
1992 Jeep Wrangler
Technical specifications of Jeep Wrangler 1992 | |
---|---|
Price: | US $26,000.00 |
Condition: | Used |
Item location: | Prescott, Arizona, United States |
Make: | Jeep |
Model: | Wrangler |
Year: | 1992 |
Mileage: | 158481 |
VIN: | 2J4FY29S4NJ536491 |
Color: | Teal |
Engine size: | Mustang 5.0 |
Number of cylinders: | 8 |
Fuel: | Gasoline |
Transmission: | Automatic |
Drive type: | 4WD |
Interior color: | Gray |
Options: | 4-Wheel Drive |
Vehicle Title: | Clean |
You are interested? | Contact the seller! |
Car description |
---|
1992 Jeep Wrangler V8 Supercharged. This Jeep has a lot of time and money put into it. Drives and runs great! This is a great all around set-up, you can do 65-70 MPH on the highway and then do the hardest trails. You can use it for daily driving or camp for the weekend. My boys and I use it for everything from rock crawling to fishing and camping. We love this Jeep, but are going to get something with more storage for over landing.Jeep is on Trailready beadlocks and 37" Nitto trail grapplers(1000 miles on them).The long list of modifications is listed below.Drivetrain Engine 1994 Mustang 5.0 V8 Advance Adapter mounting kit MAF engine management Custom brackets for D1 Procharger Supercharger Walbro 255 fuel pump
Trans 4L60E Advance Adapter 5.0 Mustang engine to 4L60E Fresh rebuild July 2018 LPW Racing deep aluminum pan Derale trans cooler with fan on 185 thermostat Custom wiring harness by RA Designs Winters gated shifter
Transfer case Custom NP231 with Advance Adapters 27 spline input shaft Fresh rebuild August 2018 Controlled by JB Custom Fab upgraded shifter
Front Axle Currie heavy duty custom width Dana 44 and Chrome Moly axles Ruffstuff diff. Cover Reid racing knuckles Chevy disc brakes and spindles, solid end drive flanges 1310 U bolt style yokes 5.13 gears and Detroit locker Warn hubs
Steering Full PSC hydro assist with 1.5x8†Ram pump, under drive pulley and steering box Genright twisted pitman arm Double shear drag link Heavy duty aluminum steering rods, 3/4†Heims Custom adjustable track bar 3/4†Heims Rear axle Ford 9†with Strange center section ARB locker with disc brakes Moser axles 1350 u bolt yokes Ruffstuff pinion guard 5.13 gears
Driveshafts Custom TAD Built front 1310 CV Custom TAD Built rear 1350 CV All u joints are serviceable
Suspension 3 link with panhard bar Aluminum links Forged Ballistic Fabrication 2.63 Flex joints (rebuildable) 14 inch Fox 2.5 coilover dual rated springs and reservoir Adjustable limit straps
Rear Suspension Single triangular 4 link with Ballistic Fabrication 2.63 Flex joints on all ends same as the front 14 inch Fox 2.5 coilover dual rated springs with reservoir Currie anti rock adjustable rear sway bar and adjustable limit strapsBody Lizard Skin ceramic coating on tub and floor Sound deadening insulation under new floor rubber Novak tunnel cover, to cover old shifter hole LED headlights and taillights Genright aluminum front bumper and stinger, with Smittybuilt 9500 winch with synthetic line Genright aluminum fenders and sliders Smittybuilt XRC seats in front and stock rear bench with Smittybuilt XRC cover Red top Optima new July 2018 Poison Spyder louvered hood skin Rock lights Rigid lightbar with side floods
The Jeep does have a small rear seal leak. When parked it drips 5-6 drops. Call with any questions Jim 609-932-6898. Parts on this Jeep are more then the reserve price!!
Buyer is responsible for all shipping and a non refundable deposit of $1000.00 is due at end of auction.
Trans 4L60E Advance Adapter 5.0 Mustang engine to 4L60E Fresh rebuild July 2018 LPW Racing deep aluminum pan Derale trans cooler with fan on 185 thermostat Custom wiring harness by RA Designs Winters gated shifter
Transfer case Custom NP231 with Advance Adapters 27 spline input shaft Fresh rebuild August 2018 Controlled by JB Custom Fab upgraded shifter
Front Axle Currie heavy duty custom width Dana 44 and Chrome Moly axles Ruffstuff diff. Cover Reid racing knuckles Chevy disc brakes and spindles, solid end drive flanges 1310 U bolt style yokes 5.13 gears and Detroit locker Warn hubs
Steering Full PSC hydro assist with 1.5x8†Ram pump, under drive pulley and steering box Genright twisted pitman arm Double shear drag link Heavy duty aluminum steering rods, 3/4†Heims Custom adjustable track bar 3/4†Heims Rear axle Ford 9†with Strange center section ARB locker with disc brakes Moser axles 1350 u bolt yokes Ruffstuff pinion guard 5.13 gears
Driveshafts Custom TAD Built front 1310 CV Custom TAD Built rear 1350 CV All u joints are serviceable
Suspension 3 link with panhard bar Aluminum links Forged Ballistic Fabrication 2.63 Flex joints (rebuildable) 14 inch Fox 2.5 coilover dual rated springs and reservoir Adjustable limit straps
Rear Suspension Single triangular 4 link with Ballistic Fabrication 2.63 Flex joints on all ends same as the front 14 inch Fox 2.5 coilover dual rated springs with reservoir Currie anti rock adjustable rear sway bar and adjustable limit strapsBody Lizard Skin ceramic coating on tub and floor Sound deadening insulation under new floor rubber Novak tunnel cover, to cover old shifter hole LED headlights and taillights Genright aluminum front bumper and stinger, with Smittybuilt 9500 winch with synthetic line Genright aluminum fenders and sliders Smittybuilt XRC seats in front and stock rear bench with Smittybuilt XRC cover Red top Optima new July 2018 Poison Spyder louvered hood skin Rock lights Rigid lightbar with side floods
The Jeep does have a small rear seal leak. When parked it drips 5-6 drops. Call with any questions Jim 609-932-6898. Parts on this Jeep are more then the reserve price!!
Buyer is responsible for all shipping and a non refundable deposit of $1000.00 is due at end of auction.