1967 Ford ProTouring Mustang
1967 Ford Mustang
Technical specifications of Ford Mustang 1967 | |
---|---|
Price: | US $33,000.00 |
Item location: | Mission Viejo, California, United States |
Make: | Ford |
Model: | Mustang |
Type: | Coupe |
Year: | 1967 |
Mileage: | 1000 |
VIN: | ca748501 |
Color: | Blue |
Number of cylinders: | 8 |
Transmission: | Manual |
Interior color: | Black |
Options: | New Interior |
Vehicle Title: | Clean |
You are interested? | Contact the seller! |
Car description |
---|
Driving Walk Around Undercar Video is below with 100 extra pictures
For sale is a newly restored Pro Touring 1967 mustang. This car has been built from the ground up and has under 1000 break-in miles! This is the ultimate pro touring mustang, it's faster, lighter, and handles better than a brand new 2020 mustang GT.
Modern 331c.i. engine with trick flow heads, Forged Pistons, and eagle rotating assembly, pushing 450hp, 4 speed top loader magnum transmission, with Hotchkis fully adjustable front lower and upper control arms and complete suspension system, SSBC front disk brakes, brand new 9 inch differential with 31 spline axles and 3.55 gears, custom lightened driveshaft, American Racing 17inch powder coated wheels, aluminum radiator, the list goes on with brand new parts.
You can drive this car the way you would a new sports car. Very street-friendly, handles great in the canyons then take it to the track and run low 11s. This car was designed for performance. It does not have any bells or whistles. It is pure performance. We took out the radio because the engine is our music.
a lot of fabrication, time, and money invested!!
The entire list of parts used will be listed below. Not everything is included because there's so much but 98% of the car is new. I have all the receipts for everything installed and used on the car. You will also receive all receipts when you purchase the vehicle.
Please take the time to read more about the car and view the 100+ photos and videos before asking any questions because most everything should be answered.
The Video has a video of the underside of the car, walk around video, and a driving video.
Paint and body
Mercedes AMG midnight blue pearl. An incredible metallic pearl that shifts color depending on the light. A lot of time spent block sanding to get a perfect finish.
Interior
Brand new complete proffesionally installed interior.
New front and rear delux seat upholstery.
New delux carpet
New gauge and dash trim.
New classic seat belt harnesses.
Engine
Modern 331 stroker motor making about 450hp
Edelbrock RPM Air-Gap Small Block Ford 302 Intake Manifold
MSD-8579 Distributor
MSD-8010 Distributor Hold down clamp
MSD-6425 6AL Digital Ignition Box
PRO-302-136 Ford Blue Valve Covers
Holley 04777CE Carburetor 650 CFM double pumper
Custom Electric Fan Assembly
Eagle Supreme Competition Engine Street & Strip Rotating Assembly
AWW 510055 American Automotive Wiring Kit
Custom Exhaust
JBA High Flow Shorty Headers
Trick Flow Heads w/ Complete Roller Push Rod and Valve Assembly
Aluminum Radiator
MSD wires
Transmission
4 Speed Top Loader Magnum
Mcleod Clutch
Custom balanced driveshaft
Summit Z Bar
Excellent clutch pedal feel, not super stiff like on all classics, but not overly soft like on some modern cars.
Rear End
Fab 9â€
31 spline axles
3.55 Gears with Detroit locker built to handle over 850hp
All professionally installed by a shop with receipts. Over $1600 in parts not even all the labor.
Brakes
Power Brakes with a dual master cylinder
Large SSBC 4 piston disk brakes on the fronts, plenty of stopping power
Brand new hard brake lines
New Brake hoses
Rear brakes all brand new
Suspension
Hotchkis 1967-70 Ford Mustang Stage 2 TVS Sport Suspension System costing well over $3,821.88 in just parts.
Hotchkis Sport Suspension (80041-2) 1967-1970 Mustang Stage 2 TVS (Total Vehicle System) kit. The Hotchkis Stage 2 TVS Kit is an all-inclusive kit that has been designed and tested as a system for your 1967-1970 Ford Mustang Coupe, Fastback or Convertible. No need to mix and match components since this kit contains Geometry-Corrected Upper Tubular A-Arms, (Does not include spring seats) Tubular Lower Control Arms with corrected ball joint angle necessary for lowered ride heights. Lower control arm adjustability is made even easier with the included Adjustable Strut Rods that dramatically improve stability and superior driver control thanks to increased positive caster and Spherical Heim Joints. Superior ride height is achieved with our small block front coil springs, 700 lbs/in with 0.5 in. lower ride height, and our heavy-duty multi-leaf Rear Leaf Springs, 180 lbs/in with 1.5 in. lower ride height. Next is our lightweight 32mm (1.25 in.) 4130 Tubular Steel Front Sway Bar and Lightweight 22mm (0.875 in.) DOM Tubular Steel 3-Way Adjustable Rear Sway Bar that allow for suspension tuning for optimum track or street performance. The Hotchkis 1.5 Street Performance Series front and rear Shock Absorbers by Fox specifically tuned for your 67-70 Mustang provide smooth ride, exceptional control, and balanced handling. Subframe Connectors are included to add rigidity to reduce chassis flex. Other than a few minutes of welding the direct install Subframe Connectors, this is a Direct Bolt-On installation kit requiring no vehicle modifications. This kit comes with Premium Mounting Hardware Including: adjustable Tie Rod Sleeves, Steel U-Bolts Laser Cut Axle Mounts & Frame Rail Mounts, Polyurethane Bushings and Grade 8 Bolts, TIG Welded Steel Dogbone End Links with Polyurethane Bushings. The Hotchkis Stage 2 TVS kit for the 67-70 Mustang offers a sleek lowered stance, dramatically improved handling, steering response and driver control by reducing body.
Cooling
Custom Aluminum radiator with an Electric fan.
Runs cool in 100-degree weather, with no overheating issues.
Electrical
All new electrical
American Autowire full 12 circuit for all power controls kit
Sequential LED taillights
Fuel
16 gallon tank
Edelbrock Manual High Flow Fuel Pump
Brand new fuel lines and Sending Unit
Billet Pony Gas Cap
Powder coating
All Chrome has been powder coated to protect it from the weather and the track environment if you wish to race the car.
Front and rear bumpers, Window moldings, tail light bezel, door sill plates, door handles in and out, side mirrors powder-coated matte black, Front grill assembly Trim, Billet Grill, Custom Hood pins.
Exhaust
Custom 3 inch high flow fabricated exhaust for maximum engine breathing. Giving the engine extra horsepower.
hi-flow cats
magnaflow mufflers
JBA Shorty Headers
Wheels
Custom Powder Coated American Racing 17x10.5 to handle any conditions and track days.
245/35/17 on all 4 corners
Walk Around Video Below
Driving Video Below
Under car Video Below
clean CA title with tags up to date in hand. feel free to inspect the car yourself or have someone inspect it for you, you will not be disappointed. once again this is an amazing mustang that can’t be built for the asking price.
The vehicle is described as accurately as possible and is being sold as-is, custom license plates are not included, full payment due within 7 days in the form of cash, money transfer, certified check, or PayPal. Shipping is buyers' responsibility but I will assist as much as possible.