1965 Ford Falcon Futura Restomod Street and Drag Car

This car was built to be a drag and street machine all in one. However it never did make it to the track. It has about 300 miles on it since it was rebuilt in 2011-2012. I had the carb refreshed by Pro Systems a few months ago, and also had a local performance shop do some minor maintenance on it to get it running perfect since it's been sitting for a while. See below for the specs.I have an inch thick file folder with almost every single receipt from the build.
VIDEO: https://youtu.be/RNSo1e_IOuEI took this in January right after the mechanic did his magic.

Motor:Bennett Racing 427P625HP at 6200 RPM, 560+ ft/lbs at 5000 RPMPro Systems Holley 4150 CarburetorDart 9.50 Deck BlockHydraulic Roller CamMarch Pulley set
Transmission:Tremec TKO 600 5-speed with .64 OD 5th gear (Hanlon Motorsports)Ram ClutchPro 5.0 Short Throw Shifter
Suspension:Heidts 4 link rearStrange 9 inch rearend (4.11:1) NOTE: Even with this high gear, the car cruises nicely because of the .64 5th gear on the transmission.Mustang II front end w/ coiloversHeidt's Power SteeringWheels: Mustang Bullet Wheels, 17x9 front, 17x12 rearTires: Nitto 245/45-17 front, 315/35-17 rearWheel tubs for rear
Fuel/Ignition:MSD 6AL IgnitionDistributor -MSD 85805 Electric Fuel pumpOE Style Fuel Tank (replaced in 2011)Battery Relocation Box in trunkCharging terminals under rear of car
Exterior:My father did all the sheetmetal restoration and took tons of photos. Album will come with the car.Shaved door handles and remote door openers (see 'Issues' below)
Interior:Air Conditioning from Nostalgic Air PartsRoll cage (only behind front seats)New front and rear seats
Stereo:JL Audio SubwooferAlpine Type S SpeakersTouch screen head unit
Issues:Speedometer is not connected. A new speedo cable gear will be needed.Front wheels rub slightly on lower A-arms. Driving on the street is fine, but moving around in the parking lot is a slightly more difficult. Narrower wheels would be the best fix.Remote door openers do not work (for the shave door handles). I have a new set but I haven't installed it yet. Door must be opened through window.
You can call me at 8136184065 for more info (or text). Thanks!