NO Reserve 1967 ELEANOR CONVERTIBLE (ORIGINAL UNIQUE PERFORMANCE BODY SHELL)

1967 ELEANOR SUPER SNAKE GT500SR CONVERTIBLE
This is a NO RESERVE AUCTION for(1) one original Eleanor Convertible body shells that I purchased in 2008 from Unique Performance, Farmers Branch, Texas. This is a rare opportunity to buy one of the original Eleanorconvertibleof which only 1 or 2 were ever built by Unique Performance (pictured below). Original convertible production was planned to be very low approximately 10, much less than the fastbacks they produced. The Super Snake cars were originally planned to be built with the Vortech Supercharged 427 producing 725HP. I purchased two of these convertibles in their auction March 26, 2008.Unique Performance is the original company that built Eleanor Continuation Fastbackand Convertibles in 2005.My intention was to build both but have never had the time to work on them. I have a restoration shop and the "shop cars" for some reason never get built, they just collect dust inthe corner. So for this reason its time to let someone else have a shot at building their Eleanordreamcar that is poised to go up in value being one of the very few original convertibles from Unique Performance.
The roller dolly that was built for this car IS INCLUDED in the auction as well as an original windshield from Carlite in good condition with no cracks. All fiberglass parts shown in photos are included as well at a cost of over $2500 when new. They will need finish fitting as they are just prefitted. All of the metal is either new or original to the carthat was rust free from California. This body is solid there are no rusted or rotten areas that need to be replaced just minor surface rust in some spots that were on it when delivered to me from Unique.
There are several fiberglass body parts that DO COME WITH THIS AUCTION. The photos show the car as it is being sold with windshield, fiberglass flairs, fenders,nose cone, side exhaust. They were being test fitted by U.P. Ipurchased fiberglass fenders with themolded in fender flairs and nose.
There are several metal body modifications that have already been completed by Unique Performance. These modifications are specific to the Eleanor cars.
The metal fabrication completed by Unique Performance include:1. Recessed metal on rear fender for pop open gas cap (unfinished on this car)2. Reinforced shock towers as well as many other seams, welded at the seams and thick metal plates added at the base of the shock tower (similar to Ford production CobraJet 428 cars).3. Side Exhaust provisions cut thru frame and lower rocker4. Custom Roll Bar welded to frame5. Right shock tower tunnel for hose pass thru6. Cowl cutouts for engine heat dissipation7. Tail light panel cutout for Shelby lights8. Steering shaft tube welded into floorboard for rack and pinion steering.
Fiberglass Parts from Unique Performance included:1. Side exhaust skirts2. Rear fender wellflares3.Complete front fiberglass fenders with fender flares molded in4. Side scoops
If you wish to purchase both cars together please contact me fordetails. To my knowledge Unique Performance only built two GT500SR convertibles (White/Blueand Yellow/Black). These photos are to show what the car will look like once complete. Auction is for body shell, parts, & rollerdolly.
Below is a parts/options list that the Unique Performance cars were originally built with if you decide to build an "authentic" Eleanor Convertible GT500SR.This list is forreference only and these parts are NOT included in the sale.

Engine
Shelby Performance aluminum 427 FE engine, 525hp
DC&O electronic fuel injection

Super Snake Version- Vortech Supercharged aluminum 427 FE engine, 725hp

Drivetrain
Tremec TKO five-speed
Currie 9-inch positraction Tru-Trac differential
31-spline axles
3.25:1 final drive ratio

Interior
Carroll Shelby embroidered bucket seats, leather
G-Force five-point quick-release harness, includes horizontal bar
Shelby signature gauges
200-mph electronic speedometer
15-inch custom steering wheel
Old Air Products Hurricane A/C system
CAE sound-dampening package
Sony stereo with CD player
DVD system
8-disc CD changer
Wheels & Tires
Shelby wheels, 17-x8-inch with 245/40ZR17
performance tires
Custom Shelby rear wheels, 17-x9.5-inch with 275/40ZR17 tires
PSE wheels, 17-x8-inch front/17-x9.5-inch rear with 245/40ZR17 and 275/40ZR17 tires
PSE wheels, 17-x8-inch front/17-x11-inch rear with 245/40ZR17 and 245/40ZR17 tires; rear tubbing
Spare Shelby or PSE wheel with mounting bracket

Exterior
Shelby emblems
SC Cobra-style gas lid
2 1/2-inch side-exhaust system

Fuel System
Electric fuel pump
High-performance fuel filter
Fuel cell, 22 gallons

Steering
Unique Suspension Products' power rack-and-pinion steering
Baer Tracker bumpsteer adjustable tie rods

Brakes
Front: 13-inch slotted, cross-drilled rotors
Rear: 12-inch slotted, cross-drilled rotors
Adjustable proportioning valve
Vented air ducts to brakes

Electrical
MSD ignition control and coil
Trunk-mounted battery

Exhaust
Headers with ceramic coating
Dual 2.5-inch with H-pipe
Spin Tech 2.5-inch aluminum mufflers

Cooling
Aluminum cross-flow radiator
16-inch electric cooling fan
Electric fan-temp switch

Chassis
Unique Suspension Products subframe connectors
Unique Suspension Products center bolt-in section
Unique Suspension Products shock-tower bracing
Driveshaft safety loop
Rollbar, four-point

Suspension
Unique Performance Products front coilovers
Koni rear gas shocks
Shelby-style traction bars
Unique Performance Products rear coilovers
I have a Texas Title from Unique Motorcars Inc. it states VIN certificationwaived but the vin numbers are on the title and can be retitled. These cars are being sold as is with no warranty expressed or implied.I can help with shipping quotes if needed. Bodies are easily transported on a rollback with winch orlow profile trailer. Roller dolly, Eleanor fiberglass, and windshield IS INCLUDED in this auction.
Thank you for yourinterest inthis auction.Please feel free to contact me if you have any questions I will be glad to speak with you.