1977 Ford Bronco Modified for Show and Go

This 1977 Ford Bronco has been fully sorted out and was built to be a standout on the show circuit or off road. This Bronco has been professionally built by a master mechanic and has been painted by an award winning automotive paint specialist. No expense was spared in building this 'show & go' Bronco. nothing but the best quality parts are used throughout. The complete frame was sandblasted and painted in Rustoleum black. All bushings have been replaced with polyurethane bushings and all "U" joints have been replaced with performance grade parts. Suspension modifications include a James Duff 3" suspension lift. 9" Ford rear axle w/350 gears. Dana 44 front axel with degreed polyurethane clam-shell clamps to achieve proper caster adjustment. Warn hubs and adjustable upper ball joints to allow for proper camber adjustment. Front anti-sway bar. the front end is set up for single or dual shocks. rear over the leaf springs traction bars. Dana 20 transfer case with 'Tom's Broncos' stainless steel twin stick that allows you to shift in any configuration. front to rear. 15" X 10" Weld aluminum wheels with new B. F. Goodrich Radial T/A's 35" X 12. 5" X 15". Bullet proof. blueprinted C4 transmission with Kevlar bands. Redline clutches. performance shift kit. trans cooler and with all the best components used in the rebuild. 2. 5" dual exhaust and a aftermarket 23 gallon fuel tank. Front disc brakes with all new rotors. calipers and bearings. Rear drum brakes with all new components and bearings. The fiberglass body is a quality unit made by "Terracomp" and has a high quality fiberglass raised cowl hood. Paint is 'Vogue' metallic silver with 'Sunburst' orange with a painted lime green accent pen stripe all covered with several coats of hand-rubbed clear. The interior is finished in 'Raptor Liner' for easy cleaning and durability. The six point roll bar is through the body and attaches to the frame. it is a 'family' bar that offers back seat protection as well. All the gauges are AutoMeter Competition gauges. The seats are Jeep with a fold up rear seat with Simpson lap belts in the front. The door opens by simply lifting up on the lock button. no visible handles to deduct from the smooth look. Matching silver painted bumpers. full stainless steel windshield frame hinge. Chrome Triumph motorcycle side view mirrors attach directly to the roll cage. The engine is a Ford 302. rebuilt using Ford GT40 heads. Edelbrock intake and Edelbrock 650cfm carburetor. It has Hedman headers and a complete MSD ignition system. Power steering and brakes make this Bronco a joy to drive with no 'twitchiness' or 'bump steer' in the steering. There is a crack in the dash overlay and 3" tear in the vinyl drivers seat (see pictures). both easily fixed. Winning bidder needs to provide a $1000. 00 deposit through PayPal within one day of close of auction. Remainder of funds to be sent by bank wire (preferred) or certified check sent by FedEx within seven days of close of auction unless other terms are agreed upon in advance. This Bronco is licensed and available to be inspected and located in Port Charlotte. FLTo view a YouTube video of this one of a kind 77' Ford Bronco click or 'copy and paste' this link: http://youtu. be/TrU5HKPOsao