1936 Ford Truck 1 1/2 Ton Little Giant Hand Crank Dump Bed Flathead V8 Manual

This Truck was found in storage for year, Appears the Drive train was restored or painted some years past,Well before I got i, The gentleman who owned it Passed Away 5 or so years ago and The truck sat it a barn , were rats got too the seat cushion paddin, The Truck has mechanical Brakes that work excellent .The tires hold air and the truck Rolls fin, I tried too start it But all i got was for it too Turn over real good . I Checked but i could not find spar, I was told too try and check points maybe they need cleaning or filing . But since i have never worked on a old Flathead V, I decided too just sell it like it is . If i find time i might try and get the Distributor out and clean the point, no guarantee, If i do will post the results , the speedometer is not in Dash But does come with sale see Photos of all the parts that go with ttruck,. All the Lug Wrenches and Hand Cranks For engine and Dump are included . the Little Giant Hand Crank functions when crank aroun, there is one tooth broken on one of the gears . But it does not effect the function of the Crank do too the teeth on the gear . The windshield is missin, Has both door Glasses ( rh side appears to be original as so maybe back window but not shure Has markings) and they do Crank up and down the channels sare pretty sho, I got both Doors too open and close .The passenger Door has the Key lock ( no keys ) so that door only opens from the inside. has the Rear Taillights on rear original style . The body appers to have had the Body work done at some time and Primed . The interior is painted REd. This TRUCK HAS THE MATCHING NUMBERS ON MOTOR BELLHOUSING AND FRAME. TRANS IS FROZE IN NEUTRA, So needs repaired or replaced .The headlights look like previous owner installed Sealed beam bulbs. But see photos I have the original Rings and Glas, I only noticed rust on Rh door lower corners see photo, does not go all the way thru too inside skin . and two rust spots on the under neath of both fenders near cab mounts ( see photos) . Grill looks pretty decent a little wavy but wotkable . RH fender has some Cracking that needs repaire, The Hood has some Dents on the Top portions that need straightenin, , See the parts for mounting the wood bed rail, i think it is missing one pin and bracke, There is one bracket on the rear frame rail on drivers sid, see the other one in the parts Photos that is complet, so you can replicate the missing bracket and pin. . overall looks like there is enough there too figure out how too mount the be, Also have some photos of The Little Giant Dump For reference. any questions feel free too e-mail me or Call Jeff 408-761-3986

On Dec-15-16 at 17:39:36 PST, seller added the following information:

This trucks Reserve price is set pretty lo, Priced too sell for what i got into i, Thanks for looking