1967 Mustang Licensed Shelby Continuation Super Snake serial number CSE-SS021

For sale is this incredible 1967 Mustang Licensed Shelby Continuation Super Snake serial number CSE-SS021. This vehicle was originally built by Unique Performance as one of the 43 Licensed Shelby Continuation Super Snakes. This vehicle is #1 of 3 Super Snakes upgraded by Revved Automotive Concepts featuring their exclusive 1000hp Super Car Package.

MECHANICAL HIGHLIGHTS INCLUDE:

· All aluminum 427ci Shelby FE bored and stroked to 482ci with 8.8:1 compression and forged internals

· Air to Air Intercooler
Vortech Y7YSI pullied to 12 lbs.

· FAST sequential electronic fuel injection

· Custom BeCool cooling module

· Ceramic Coated 3" side exit exhaust

· Tremec TKO 600 with hydraulic Dual Disk clutch

· Full coil-over Suspension

· Pushrod Rear Suspension

· Currie Built 9" rear axle with True-Trac diff and 3.50:1 gear ratio

· PSE 8"x17" front and 11x17" rear wheels and tires with approx 500 miles

· Ricks HodRods 22Gal Stainless fuel cell with A1000 pump

· Power Brake system

· Upgraded Stereo System

· Full Subframe bracing

· 4 Point Roll Cage

Thisincredibleexample has been driven about every 2 to 3 weeks since its rebuild was completed in 2011 and has travelled a total of 2127 miles. It is fully upgraded, ully sorted, etailed to a condition better than new, nd ready for you to drive!

Visit our webpage athttp://www.revvedautoconcepts.com/for sale.htmlfor many more detailed photographs and technical information on this vehicle.

$275,000

For more information on this vehicle please contact:

Sean Sawyer

Revved Automotive Concepts

ssawyer@revvedAC.com

817.403.8565

or

Chris Burch

cburch@revvedAC.com

682.321.2205

Background information:

There were to be 75 Licensed Shelby Super Snakes built by Unique Performance as a tribute to the original 1967 Super Snake Mustang built by Shelby for a Goodyear Tire promotional in 1967. When Unique Performance closed for business in 2007 there were only 43 completed. This vehicle is recognized by Shelby American as a Licensed Shelby Continuation Super Snake. Copies of all original Shelby and Unique Performance paperwork come with the vehicle.

This Super Snake has been fully upgraded by Revved Automotive Concepts, he foremost specialist on servicing Unique Performance vehicles. The vehicle comes with full documentation of the work performed, iring diagrams, nd full photo documentation. All of the work done on this vehicle is done in the same visual style as the original build so that it appears as if it would have been built this way originally. All systems on the car are built to be servicable. The total cost of the vehicle upgrades was approximately $95,000. Full details on the rework of SS021 is available herehttp://www.revvedautoconcepts.com/for sale.html

The exterior of the vehicle has just undergone a complete paint "compounding" process being completely repolished and detailed inside and out. There are a few small rock chips on the front lower valance as this vehicle has been driven and is fully sorted with 2127 miles as of 8/1/2015. This vehicle has no known paint or body issues.

SS021 is one of three that have received our "Super Snake Supercar Package." We replace the original Vortech V2 Supercharger with a larger V7 YSI head unit mounted to a custom bracket. We then fabricated an Air-To-Air Intercooler system that fits perfectly inside the G.T. 500E bodywork. Fuel control is handled by a FAST sequential fuel injection system with 85lb/hr fuel injectors timed by a separate distributor and crankshaft trigger for the greatest accuracy. The vintage supercharged look is maintained by hiding the throttle body inside a vintage style carburetor enclosure. Coupling the engine and transmission is a dual disk clutch with aluminum flywheel managed by a hydraulic clutch. With our massaging, he clutch effort is that of a late model performance vehicle. The cooling system has been upgraded to a custom piece we designed with BeCool, eaturing an oversized crossflow radiator with dual 13" SPAL fans and full aluminum shrouding to keep engine temps under control. Engine oil and power steering fluid are routed through their own dual circuit cooler with thermostatic electric fan. Exhaust is carried out by a hand built 3" ceramic coated exhaust system. The result is a completely streetable engine package producing just under 800hp and 800 ft/lbs of torque at the wheels with approximately 12 lbs of boost. For the daring there is a smaller pulley available that will bring boost up to approximately 15lbs but the vehicle was so tail happy we detuned it for street driving.

The 427 All Aluminum Shelby FE in this vehicle was originally built by Keith Craft Racing and is bored and stroked out to 482ci, ith a SCAT forged rotating assembly, tage 3 ported Edelbrock Aluminum heads, nd a T&D rocker system. During our rework of the vehicle the engine was rebuilt by famed FE builder Gessford Machine in Hastings, E and has seen just under 1000 miles since the rebuild. During the rebuild the head gaskets were upgraded to Cometic Multi-Layer-Steel gaskets as found in late model forced induction engines. The camshaft is a custom grind Competition Cams hydraulic roller for easy living on the street.

The stereo system has been upgraded to include a 4 channel JL Audio amplifier powering two front 6.5" Rockford Fosgate Kickpanel speakers to augment the 6x9" speakers mounted in the rear package tray. The stereo also has an AUX plug for use with any smartphone, Pad, Pod.

The original Unique Performance build sheet, arranty Sheet, nd RAC updated Spec sheet are available upon request.

The vehicle is currently in Phoenix, Z and showings be made by appointment only.

For more information on this vehicle please contact:

Sean Sawyer

Revved Automotive Concepts

ssawyer@revvedAC.com

817.403.8565

or

Chris Burch

cburch@revvedAC.com

682.321.2205