1969 chevelle 496 big block

This is my 1969 chevelle Malibu that I have been building for 7 years. the car started as a Malibu and I turned it into a clone.

The interior on the car has all been changed everything including dash is new. The carpet could need a new one because I cut it to big around the roll cage and the shifter I little. The front seats are procar with new tracks the rest of the interior I went stock. the car has a roll cage as you can see in pics awesome tig welded cage that will cert for 8.50s the cage does not go through the fire wall to the nose of frame rails.

The body on the car is in really good shape I replaced the doors complete with repos new fenders new truck floor for fuel cell new header panel new truck lid new hood new tail panel. The body was all new really exept the roof and quarters. The car has body filler in the quarters I shaped the wheel well back into the quarter with bondo. SO I want to be clear the quarters need to be changed that is why I left it in primer. The car is in epoxy primer with very little reducer so it feels like sandpaper the body. I wanted something that was not going to fade and hold up good.All the trim and tail lights and emblems are all new including a new front and back window trim. Also has new front and back window in car. Car has weld rims and mickey Thompson tires drag radials in real has 10 inch tire they are new 100 miles on front tires and 1000 or rear tires. Has long wheel studs in rear.

The motor is a 454 punched out and stroked to a 496 solid roller motor . Car runs great. It has a 665 lift solid roller comp camroller rockers dart intake 1050AED dominatorcarb 2 inch hooker ceramic coated headers high flow water pumphas moroso 7 quart oil pan with high volume pump The entire engine and car has all brainded earls lines and an fittings.Has a cvr vaccum pump so I can run power brakes I only have that because I installed the new powerbrake system with disk up front and new booster and could not return it all and go to manual. Has holly 150 electric pump in trunk.New serp belt setup from march including march power steering pump and reservoir and all brackets.power master 140 amp chrome alternator. The rotating assembly is all eagle. pipes 3 inch stainless exhaust with electronic cut outs to run open headers with a push of a button the mufflers are flowmaster stainless super 44s Has aluminum radiator and duel fans with stainless steel shroud.Has 6al msd box and I have msd 2 step. I have so much I could list it would take foreverjust ask and I will let you know. The motor should make 650 to 700 hp and car runs 10.95 to 11.1 with fresh drag radials. I never ran slicks.

The trans is a TCI turbo 400 has new moly driveshaft has 12 bolt with 411 eaton posi in it with drum brakesI do have race rear also which is 12 bolt with 433 Richmond gears and moser axles and c clip eliminators. if the car hits my reserve i will add the other rear also in sale. The car has all new brakes front and rear. Has disk brakes up front and drum in back. The fronts are drilled and slotted rotors. All the lines have been changed with stainless lines. Hasnew front end in car has boxed trailing arms in rear edelbrock shocks Everything on the car has really been changed and when i was building i used the best of everything i did not cheap out on any parts. Except the repo stuff but i really had no choice.

I have a lot of money in this car. I have receipts for everything! If you have questions just ask i know iforgot lots of shit.If you want to see it let me know i am only showing to real buyers No test drives i will take you for a ride. i drive the car a hour to my house from work all the time runs great on highway for big motor never goes over 200 on highway and 185 to 190 around. And yes it is not a real SS just a clone only thing i did not clone was the cluster is wrong. Pro street with small rubber

The last couple pics are of me doing work to car in different stages. and picture you want let me know i have pics of car with just the tub on it but ebay only lets you do 24 pics

Ialso have a 396 engine that i pulled out that is punched 60 over i could sell carb to pan for additional price

For sale local I have the right to end auction at any time. I have great feedback if you don't don't bid. I will not accept 0 feedback people

On Jun-05-15 at 19:49:23 PDT seller added the following information:

I wanted to add a couple things the car needs weather striping the doors and fenders are not aligned to the best they could be This car is not a show car needs little things. The heater core is there but I don't have lines ran for it. The new plastic front fender wells line up like shit I want to just remove them all together was waist of money