1966 Corvette 427/425HP Roadster, Matching #s, 4 spd,REAL 900AA Tuxedo Black car
1966 Chevrolet Corvette VERY RARE MID-YEAR CORVETTE
Technical specifications of Chevrolet Corvette 1966 | |
---|---|
Price: | - |
Condition: | Used |
Item location: | Cardiff by the Sea, California, United States |
Make: | Chevrolet |
Model: | Corvette |
SubModel: | Stingray |
Type: | Convertible |
Trim: | VERY RARE MID-YEAR CORVETTE |
Year: | 1966 |
Mileage: | 72000 |
Color: | Black |
Engine size: | 427/425HP |
Number of cylinders: | 8 |
Fuel: | Gasoline |
Transmission: | Manual |
Drive type: | RWD |
Interior color: | Black |
Drive side: | Left-hand drive |
Vehicle Title: | Clean |
You are interested? | Contact the seller! |
Car description |
---|
This is a very rare and very desirable Mid-Year Vette. It is a matching #s, 72,000 original mile 1966 Corvette 427 Roadster that came from the factory as a true 900AA code triple Tuxedo Black car. They only made 1,190 with these paint codes in total. When you factor in that was the total production whether it was a Coupe, Roadster, Big Block, Small Block, automatic, or a 4 speed, this car is even more rare. It has it's original matching # 427/425 horsepower L72 engine, original 4 speed manual transmission, and original 4.11 posi traction rearend. The Corvette is a factory sidepipe car. It was also optioned with the knockoff wheels originally. It has both the hardtop and the convertible soft tops. How many more chances do you think you will get to find a real deal, matching # 427/425, 4 speed, two top, sidepipe, Knockoff, true Triple Black car that is actually reasonably priced?
The car has been in the garage and stored properly. It was still being driven within the last couple of years. The water pump went out and there were quite a few leaks so the engine was pulled to have it re-sealed. The engine has been re-installed and bolted in but the car is not currently running. However, everything is there to re-install and make it a runner again. I certainly have too many projects and definitely not enough time. Here is somebody's chance to get their dream car at well below what some of the others are selling at. If I do get a chance to get to it and make it a driver again, the price will go up significantly.
The car has been repainted a long time ago and is older driver quality paint. It is not show quality by any means. I like them like that so you can actually take them out and drive them. If you prefer a perfect NCRS Top Flight, 1000 point Concours winner that lives in one of those stupid plastic bubbles it's entire life, this is not the car for you. This is not a $100,000+ show car and is not priced like one either. The frame is in excellent condition. The black interior is in excellent condition. The upholstery, dash pads, etc. are all nice. Original AM/FM radio. 6500 redline tachometer. Factory 4 speed shifter.
This is a great car but still a bit of a project. However, it is most definitely a worthwhile project. Clean, clear title in hand. The reserve price is set to sell the Corvette COMPLETE WITH THE KNOCKOFF WHEELS. This particular set are not original to this car but are real Kelsey-Hayes Knockoffs. I could use them for one of my other cars. They are a complete set of 5 KO wheels. IF YOU DO NOT WANT THE KNOCKOFF WHEELS I WILL SELL FOR $5k LESS.
I will also be listing my 1962 Corvette Fuel Injected project car if anybody is interested.
IF YOU HAVE READ THIS FAR AND WANT TO KNOW IF YOU CAN DRIVE IT HOME, PLEASE START OVER AT THE TOP!
I would consider doing some horsetrading on an interesting Corvette, Mustang, Muscle Car, or a steel body Hot Rod. Please be realistic with your trades. Just because you don't want your junk any more doesn't mean that I do either.I am located in Cardiff, CA in North County Coastal San Diego. Inspections in person are encouraged. Thanks and good luck!
I can help with transportation either getting it loaded on a truck or assisting you however I can at the buyer's expense. Inspections are encouraged but must be completed before the end of the auction. $1000 non refundable deposit due at auction end and remaining balance due within three working days. Payment must be in the form of cash in person or via certified bank wire transfer. I do my best to accurately describe the vehicle to the best of my abilities. Any descriptions or representations are for identification purposes only and are NOT to be construed as a warranty of any type. It is the responsibility of the BUYER to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The SELLER shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. The BUYER is responsible for any/all shipment costs involved in transportation of the vehicle. References for shippers are available upon request. This Corvette is being sold "as is, where is".
On Jul-19-20 at 15:12:21 PDT, seller added the following information:
Thank you for the tremendous response on the car. I am doing my best to try to get back to everybody but my phone has been ringing almost non-stop. The Corvette was a running, driving car a couple of years ago and I do have all of the parts to put the car back together. The exhaust manifolds, sidepipes, fan, fan shroud, distributor, water pump, air cleaner, ignition shielding (it is just the main base part of the shielding. I do not have the smaller side pieces and I believe it is reproduction anyhow), plug wires, pulleys, thermostat housing, etc. It is very complete. Thanks!
On Jul-19-20 at 20:07:37 PDT, seller added the following information:
I also have the center horn cap for the steering wheel. It is just not clipped on currently.