454ci / 4sp Frame off, “Rotisserie” Restoration! Show/Street/Strip Pro Touring!

1972 454 - 4sp Chevelle

Beautiful Frame off, "Rotisserie" Restoration !! Show/Street/Strip Pro Touring !!

I am selling my beautiful 1972 Chevelle. I believe this is one of the nicest one's you will find. This car was recently taken completely apart, with the body put on a rotisserie. All the "original" body parts, (doors, hood & trunk deck) taken to the metal along with the body then color spray cut in prior to reassembly. The bottom of the body was sprayed with POR-15 with the rest of the car "Powder Coated”. Yes, the entire frame, all suspension parts, rear end housing, gas tank & even the fender wells, inside & out.... Were powder coated to gloss black. Of course, All bushings (body mount, front & rear suspension, ect...) were replaced with new. All brake & fuel lines were replaced with stainless lines. In addition, all chrome trim was powder coated to include window trim, door handles & even the windshield wipers.

The Paint is Stunning!!Three coats of Viper Yellow, with the Black SS Strips deep under the FIVE coats of Clear !! All the gaps are perfect with many, many hours spent to align doors, hood, trunk, even the bumpers are perfect. The paint is flawless and could be shown at Barrett-Jackson / Mecum Auctions anytime, I guarantee it will take home the 1st place trophy at your local car show. Just add some mirrors under it to fully impress the Judges.

The 454, sporting well over 500hp runs VERY strong & dependable, with only 1500 miles on the build!! The 4 speed shifts very smoothly with the new clutch and the power steering and (4) FOUR wheel disk brakes make it fun to drive anywhere.

Interior:

Naturally... the interior is New. Dash pad, seat covers, seat foam, door & sail panels, carpet, headliner w/ a Grant wheel. Not much more to say.... NEW !!

Engine:

Pro built 454 ci w/500+ Horsepower - too much to list !!

Forged rotating assembly with 10 to 1 forged SRP Pistons, all balanced.

Com Hyd Roller Cam & Lifters - .547" lift / 230/236 dur @50. Cut on 112 degree center. Roller Rocker Arms.

Pocket & port matched Heads with Stainless 2.25 int / 1.88 exh valves

Demon 850 Carb - worked on!

MSD 6al ignition box & MSD distributor provide the spark.

March Serpentine Pulleys w/ Aluminum Power Steering Pump & Alternator.

Transmission:

Muncie M-21 4 speed transmission, w/ new kit (synchronizer rings, bushings, bearings & gaskets) installed.

McLeod Street Extreme Ceramic 11" Clutch.

Hurst Competition/Plus Shifter.

Chassis / Wheels:

3" Stainless exhaust with stainless Magnaflow Mufflers.

12 Bolt HD w/ Eaton Posi Performance Differential 3.42:1 ratio.

4 Wheel Disk Brakes w/ Hawk Performance Pads.

All NEW Bushings on NEW Powder Coated Frame & Suspension.

New Stainless Lines.... All of them.

20" Coys on back w/ 275/40/20 ZR tires & 18" up front w/ 245/40/18 ZR's.