1994 C3500HD 3500 6.5 6.5L turbo diesel crane boom EX Altec bucket 35ft AT200A
1994 Chevrolet C/K Pickup 3500 HD
Technical specifications of Chevrolet C/K Pickup 3500 1994 | |
---|---|
Price: | US $5,990.00 |
Item location: | Lake Worth, Florida, United States |
Make: | Chevrolet |
Model: | C/K Pickup 3500 |
SubModel: | C3500HD |
Type: | Utility |
Trim: | HD |
Year: | 1994 |
Mileage: | 175000 |
VIN: | 1GBKC34F2RJ115792 |
Color: | White |
Engine size: | 6.5L |
Number of cylinders: | 8 |
Fuel: | Diesel |
Transmission: | Manual |
Drive type: | RWD |
Interior color: | Tan |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Car description |
---|
You are buying 1994 Chevy 3500 turbo diesel V8 manual 5 speed transmission
Truck is a dually, with utility bed, and Altec AT200 model crane (35ft reach)
Mileage is 175,000
Engine is brand new, crate motor from Chevrolet (no paperwork)!
No blow-by, no leaks, no smoke
Shifts strong, and drives very smooth
Curb weight 10,750 lbs
From factory this type of vehicle comes WITHOUT AIR CONDITIONING (NO A/C)!
Crane operates smooth, with remote control pad located in the passenger rear bed compartment
The crane has eyelet on the end of it. Boom operates properly in-out, left-right, and up-down.
VIDEO LINK OF CRANE IN ACTION (copy/paste in browser):
***********
youtu.be/xiuv0YP8CG0
***********
All Altec safety procedures are still active and need to be followed in order to engage the PTO and the crane machine. Instructions with required steps to perform are printed on the plaque located on the shifter lockout box lid. Factory Altec user manual is included. Machine model is AT-200A
All lights work, vehicle is road ready and is currently being used. Tires have 50% left, approximately.Brakes have 50% left, approximately
I have relocated injector driver module into the front bumper, and attached it to a large aluminum heat sink. This is a reliability upgrade that will prevent driver module from failing
Also, better air filter has been installed on the turbo, along with oil breather catch can
This is not a brand new vehicle, and as such you will find some rust holes in the bottom floor panels of some of the utility bed compartments, some cracks in interior dash trim, and some wear on the seats. However, overall it is a good work vehicle that is turn key.
I have used this vehicle to pull and install engines in boats, it does great at reaching out and picking up weight. I estimate weight lifting capacity at 500lbs at full 35ft extension. Shorter the extension, higher the weight lifting limit. Routinely I was pulling 1000lb+ engine/transmission combos from inboard/outboard boats at near full extension. Truck also saved my back lifting bundles of shingles and rolls of felt paper up on to the roof of the house, and on any heavy lifting jobs I used to do manually. Someone will get ab able helping hand!!!
Please ask any questions before bidding!!!
Vehicle located in Lantana Florida 33462Nearest airports are, in order: PBI (West Palm Beach), FLL (Fort Lauderdale), MIA (Miami)Fly in and drive it home
Thank you
Truck is a dually, with utility bed, and Altec AT200 model crane (35ft reach)
Mileage is 175,000
Engine is brand new, crate motor from Chevrolet (no paperwork)!
No blow-by, no leaks, no smoke
Shifts strong, and drives very smooth
Curb weight 10,750 lbs
From factory this type of vehicle comes WITHOUT AIR CONDITIONING (NO A/C)!
Crane operates smooth, with remote control pad located in the passenger rear bed compartment
The crane has eyelet on the end of it. Boom operates properly in-out, left-right, and up-down.
VIDEO LINK OF CRANE IN ACTION (copy/paste in browser):
***********
youtu.be/xiuv0YP8CG0
***********
All Altec safety procedures are still active and need to be followed in order to engage the PTO and the crane machine. Instructions with required steps to perform are printed on the plaque located on the shifter lockout box lid. Factory Altec user manual is included. Machine model is AT-200A
All lights work, vehicle is road ready and is currently being used. Tires have 50% left, approximately.Brakes have 50% left, approximately
I have relocated injector driver module into the front bumper, and attached it to a large aluminum heat sink. This is a reliability upgrade that will prevent driver module from failing
Also, better air filter has been installed on the turbo, along with oil breather catch can
This is not a brand new vehicle, and as such you will find some rust holes in the bottom floor panels of some of the utility bed compartments, some cracks in interior dash trim, and some wear on the seats. However, overall it is a good work vehicle that is turn key.
I have used this vehicle to pull and install engines in boats, it does great at reaching out and picking up weight. I estimate weight lifting capacity at 500lbs at full 35ft extension. Shorter the extension, higher the weight lifting limit. Routinely I was pulling 1000lb+ engine/transmission combos from inboard/outboard boats at near full extension. Truck also saved my back lifting bundles of shingles and rolls of felt paper up on to the roof of the house, and on any heavy lifting jobs I used to do manually. Someone will get ab able helping hand!!!
Please ask any questions before bidding!!!
Vehicle located in Lantana Florida 33462Nearest airports are, in order: PBI (West Palm Beach), FLL (Fort Lauderdale), MIA (Miami)Fly in and drive it home
Thank you