AZ 1961 Custom Apache C10 VIDEO
1961 Chevrolet C-10 Apache Stepside
Technical specifications of Chevrolet C-10 1961 | |
---|---|
Price: | US $35,477.00 |
Item location: | Cave Creek, Arizona, United States |
Make: | Chevrolet |
Model: | C-10 |
Type: | Stepside |
Trim: | Apache Stepside |
Year: | 1961 |
Mileage: | 99,000 |
VIN: | 99,000 |
Color: | Two Tone SIlver/Gray |
Engine size: | 350 |
Number of cylinders: | 8 |
Power options: | Power door popper, Power Disc Brakes, Power Steering |
Transmission: | Automatic |
Drive type: | RWD |
Interior color: | Gray/Blk |
Options: | CD Amplified stereo |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Car description |
---|
1961 Custom Apache 10 VIDEO BELOW
Go to Midyearqueen on Ebay in your search engine for 3 videos
Not just C10 enthusiasts, but those specialized truck builders I work with are impressed with the character and construction of this build. I have 3 c10s and multiple muscle cars but this is THE truck that pulls everyone to it like bees to honey. Enter the gas station with that menacing rumble and stance......and the swarm begins!
Not the typical C10, but something much more special. An older pro restoration on a unique Apache model, freshened up and done right. This is one case where it is extremely hard to illuminate just how stunning this Apache is.
(Be sure to search & view the 3 videos on "Midyearqueen on Ebay" running on Youtube.
Basic Mechanical upgrades
Front Power Disk brakes
Conversion to 5 bolt 5 on 5
Power Steering
Lowered springs
EZ Air Ride four corner Air Suspension system
New front & Rear Monroe gas shocks
GM Crate 350 motor
Bosch Mini starter
B&M floor shifter
GM Turbo 400 3 speed trans
Chevy 12 Bolt Positraction
Relocated interbed flush mounted Fuel tank
Chromed Headers
Magnaflow dual exhaust and chrome tips
HEI electronic Ignition
Dual Spal fans and Shroud kit on thermostat
Holley Logo polished Hammerhead Air Cleaner
New performance air filters
Edelbrock Hi flow polished Fuel Pump
Edelbrock Polished Performer Carb 600 CFM dual Plane w/ Electric choke
Edelbrock polished Hi-rise Performer Intake #1761
Edelbrock polished stainless valve covers
K&N stainless breather with filter
Chromed water pump & Alternator, 4 Stainless pullys & brackets
Body/Exterior
Professional Two tone, 2 stage Silver/Gray metallic, painted & cleared over pin striping
Shaved door handles
Halogen Hi/Lo headlights/ LED tail lights
Matching hard fiberglass bed cover w/shocks & locks
Remote powered driver's door (new Watson Streetworks)
All Glass replaced and tinted
Chromed nose, bumpers, emblems
Halogen Hi/Lo Beams, LED tailights
Brand New Legend 17' Rally Wheels & Center Caps
Brand New BFG Comp tires 235 &255/45ZR 17
Custom wood bed slats
Rear wheel spacers, but not tubbed.
Interior
Complete Autometer Gauge cluster system
Phantom Series Autometer Tachometer
Near perfect Gray fabric Interior (could be spray dyed blk)
Nice black carpet, no worn spots, finished correctly
Clear windshield, clear gauge glass
Kenwood head unit, Kenwood hidden amplifier and 12" Sub
Chromed Glove Box, E brake handle, Air vents etc
High Gloss unchipped Black dash and interior doors
Grant GT steering wheel
Autometer Super Tach
Chrome step plates
No holes or knobs missing
Nicely chromed door handles, crank knobs, no pits
History
I purchased this Apache 10 in California and have spent the entire time of owning it fixing little things to make this already cool truck even better. Its history has been a truck that was occasionally driven and showed. The tires I replaced were 18 years old and the tread was still very good on all 4. It has lived in Washington state but does not exhibit the typical rust damage characteristic of a wet climate. The seller left handwritten notes that the Crate 350 was new. There are a lot of clues to support this but mileage is unknown.
Overall Driving experience
Starts quickly, flawless throttle response with no hesitation, no smoke, idles great, no engine noises. Steers and drives straight, no wandering on highway, no humming or clanking noises from drivetrain. No humming of rear end or crunching universal joints, no brake squeal. Exhaust system sounds ominous but not overly loud. That cammed, bumpy muscle resonance you gotta have. Shifts normally. Reverse Lockout works on B&M but the red indicator needle is missing.
Yeah, its got suds! Plenty of power from that crate 350. No detonation.
Stops, like right now! The power disc brakes work incredibly well. Steers well without growling noise from power steering unit. Doors secure, electric popper latch holding over bumps now.
A smooth ride on new wheels and tires with a very powerful stereo that is very crisp, loud and plenty of Bass, when you want that. You can adjust your ride height to where it suits you. It will drop low for show.
Had no overheating issue even without an aluminum radiator, even when it was 110 outside. Electric fans come on when needed, not running all the time.
Now I may be a picky one about ride comfort. I have not mastered the 6 button EZ Ride air suspension which includes 2 dash mounted paddle valves, PSI gauge, compressor, air tanks and some toggles switches. The ride at any height was very smooth and comfortable. However, when we installed the Monroe gas shocks some level combinations introduced a bouncy aspect. The compressor works as designed and the system works fine according to my mechanic who has installed these. It may be learning curve thing.
Exterior Condition
Great stance you can adjust with four buttons, to exactly your taste. Straight body lines, proper hood, bed cover and door fitment. Doors, hood, tailgate open and close properly. Professionally painted and done to high standards. Bumper Chrome looks triple chromed and fresh. Paint slick, swirl free, highly reflective, very even, not thinning or over buffed, cracking or peeling. the pinstriping is straight, well aligned and properly integrated under the clear coat layer. Rubber seals are not dried out and cracked. Cowl area is clean. Windows roll up and down without assistance. The Bed cover now sits properly with new shocks. This could be a 9 but for a few small bubbles on rear fenders and typical door edge chips. So I give it an easy 8 that could go to 9 for little money. The only obvious issue is a cracked vent window. The truck was locked with all the windows up and no popper remote was ever installed, so the transporter broke the vent window to open the door.
We installed a new remote popper system. We did not get to replacing the glass. The bedwood slats are serviceable but quite weathered. The interior bed walls though not banged up, could be sprayed with matching Gray Linex and new slats installed for a buyer wanting to SHOW the Apache rather than USE it as a daily driver.
Engine Bay
Shows very well. Clean and neat with no amateurish modifications. So much looks new. Carb, Valve Covers, pulleys, brackets., Intake manifold, choke, linkage and fuel pump... even the block. Underside hood, cowl, Inner fenders firewall and radiator support all in good condition. Gaskets show very little age. No leaking seen. Lots of chrome or polished Edelbrock and Holley components. Hoses, belts all look in very good condition. Battery holds a charge and alternator works properly.
Guages/controls/Electrical
Hi/Lo Headlights, front and rear signals, brake lights, and all the cluster gauges, Autometer tach, including fuel gauge work well and fully illuminated. (latter sending unit replaced.) Typical to West/Southwest vehicles, heater is deleted.
The wiring in the truck shows replacement rewiring throughout and the fuse block was replaced at some point, but it retains the glass fuses style. I typically rewire my vehicles with American Autowire kits with blade fuses. But since we really had no big electrical issues and it wasn't 50 year old wiring I left it as is rather than increase my price. I have a great wiring guy that would love to do that for the buyer for a great price prior to delivery. The wiper switch and horn need to be rewired, at minimum.
Undercarriage
Frame, undercarriage including floor pans appear solid, I saw no rust through or patch panels. Undersides of Fender wells are undercoated. The undercarriage appears to have been treated at some point with either POR or some other rust preventative product. It looks clean without an accumulation of grease or leaking fluids. There was some trans fluid drips around the pan gasket but tightening of a few bolts seems to have stopped it. I have more undercarriage photos if you want them. Body mounts are not blown out and springs, bags and A arms look fine. From underneath the Starter, cables, engine pan and bolts, oil filter, gaskets and many accessories do look recent. Transmission case is clean. Exhaust is galvanized steel and shows some rust spots, but not through and not leaking. Rear differential looks clean as well. No leaking brake cylinders or leaking calipers.
I should mention that when buying a vintage vehicle I have learned to look under and behind the dash at the firewall. Often you will see a lot of rust in there even on an otherwise clean car. This trucks firewall is very nice and dash looks good.
What's left to do?
Over the year in the shop, we have sorted out the gremlins and while none were major issues, the list added up fast. We did not replace the wing window or refinish the oak bed. I have taken this Apache as far as it needs to go for someone to have a beautiful and reliable C10 they can drive every day that won't cost $50K. There is plenty of room to rewire the wipers and horn. This is a spectacular looking and reliable custom truck and though I have picked at flaws I have discovered, it gives you a fuller picture.
Why selling?
I have an ongoing issue with buying too many cars and when they all come back from the various old timers shops, I end up storing several. It's just not fun to own a cool car you can't at least admire in your garage. This will go to the January Scottsdale auctions if it doesn't sell here. Check my feedback, Over the years, most all of those few cars sold sight unseen. I would much rather sell to someone who comes and looks at it. At an auction buyers can see it which causes me less worry. They also pay buyers premium and sales tax and I pay sellers premium.
Pre-sale Inspections are encouraged! I will not sell to anyone who has not contacted me with questions. I have a big storage problem right now so a trade is really not of interest.
Title & Housekeeping
Arizona title, clear, no liens, no branded title, not salvage. Paypal deposit of $1500 is non refundable.I will cooperate with your shipper and video the load and the transporters license tag. I offer two weeks storage awaiting your shipper at a nearby friend's garage.
I have sold successfully to zero rated buyers who were legitimate buyers but new to Ebay and had not yet built a rating. Still, buyers with less than 30 transactions need to contact me in advance or their bid will be cancelled in fairness to other buyers.
Disclaimer
I am a long time senior collector/ restorer that relies on a very seasoned network of senior local tradesman who specialize in metal fabrication, paint, mechanical and electrical systems. I myself
am not an expert in any of these specialties and describe these vehicles to the best of my knowledge.
I will not be held responsible for any mistake, misstatement or omission in this presentation. It is the responsibility of the buyer to inspect and evaluate prior to the sale.
Midyearqueen 1961 Apache - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window: