1972 CHEVELLE SS 496 Big Block, Street Legal Pro Street Car.

I'm selling my 1972 Chevelle SSwith a serious Big block Power Plant.Street Legal with a clear title, I have less than 200 miles on this 2017 build, and only 2 test & tune track days. No bugs to work out, Race or Street Ready right now!! Full interior with roll cage.Complete metal car with only a Fiberglass Hood, (Not tubbed), 9" rear with 390 Gears, Everything is installed New: Quick Fuel 950 CFM carb, MSD Pro-Billet Dist & Box, A bullet Proof Coan 400 Turbo Racing Transmission W/TRANS BRAKE, 4 Wheel Disc Wilwood brakes, with a Line Lock to warm your tires, (Not Needed)New Flowmaster 3" Full exhaust with Chevelle Stainless tips out the back, Runs Mid 11's in the 1/4 mile on Pump gas, Runs 180 Degrees all day, as you dig deeper, you'll discover great upgrades as I listed my engine purchase below:
496 CU IN/606hp CHEVY ENGINE BIGBLOCK STROKER POWERFULL 454 502 540 CRATE MOTOREASY DIRECT FIT MUSCLE CARS THIS WEEK ONLY FREE SHIP
A. R. Racing - Performance
Engine Builders are
Proud to offer For Sale
NEW FOR 2016 YEAR PRO STREET SERIES BIGBLOCK ENGINES WITH GROUND POUNDING TORQUE AND EXTENDED RPM RANGE 496 CU IN STROKER .FEATURES THAT YOU DO NOT FIND ON OTHER BUILDUPS!@! THIS ENGINE IS A DIRECT FIT WHERE A 396 THROUGH 454 WOULD GO AND EASY UPGRADE FOR 350 ENGINE CARS.FINALLY THEY HAVE ARRIVED THE ALUM HEAD BIGLOCKS WITH FULLCASTING PORTWORK RACE GRADE ALUM HEADS AS WELL AS FORGED RODS AND PISTONS .ALL NEW PRO RECTANGLE PORT HEADS WITH HI FLO INTAKE PORTS THAT ARE NOT TO HUGE ALLOW HUGE LOW RPM AIRFLOW TO MAKE LOW RPM TORQUE YET PUNCH OUT GREAT HP #S OVER A EXTENDED RPM RANGE. OVERSIZE VALVES HELP MAKE THE POWER FIGURES OUR HEADS AND MATCHING CAMS AND COMPRESSION RATIOS ARE TRULY PROVEN POWER COMBOS DERIVED FROM DYNO TESTED COMBOS WITH ACTUALREAL DERIVED POWER FIGURES.READ THESE OUTSTANDING FEATURES AND SEE WHY WE ARE THE BEST BUILDERS ON THE NET.FORGEDPISTON, ALL FORGED RODS,STAINLESS VALVES 2.25 /1.90 FULLROLLERROCKERS PUMP GASHI TORQUE FULLY BALANCED/STREET BLUEPRINTED/FILE FIT RING SETS NEW LITE FULL ROLLER STAINLESS ROCKERS FOR OUTSTANDING RELIABLE USE 2 TIMES STRONGER THAN A ALUM ROCKER AND IMPROVED CAM SELECTIONS ..MUCH MUCH MORE WE HAVE 2 AND ONLY 2 TO SELL DONT MISS THIS ONE DONT ACCEPT ANYTHING LESS!! SOLD LESS CARB AND DIST

• 606 hp @ 6000 RPM 630 ft. lbs torque 4400 RPM 496CU IN CU IN PERFECT SS CHEVELLE TRUCK OR CAMINO REPLACEMENT ENGINE
• All new internals proffesionally
• Prepared block

Machine work and parts that set our engines apart
valued at: $7,895

Machine Work

• Select Hi Tin blockmachined 030 - 950.00 CU IN
• align bore and or check for run out.full race clearancing
  
• Mag Check-preasure check ... $40
• Hot Tank - Jet Wash .... $50
• Bore Torque Plate Hone ... $125 Torque Plate Gives True Finish
• Clearance block - -casting flash only n/c..
• Dynamic balance assembly.. $125
• File fit rings - blue print clearance... $90
• Float - pistons to rods...
• Install cam bearings - freeze plugs... $45
• Port blue print cylinder heads..150.00
• Final assemble full rotating and top end
• Parts including final torque - clearance - and geometry of all parts... $200 total labor you could spend 1600.00

All new Performance Internal Parts

• USA MADE JE/SRP/WISECO FORGED pistons 10.7 to 1 piston set[ 689.00 PUMP GAS OK
• Eagle steel stroker crank all new 4.25 stroker .. torque at low rpm where you need it
  
• Childs & Albert - zz gapdura Moly File Fit Rings... $159.99 [provides the ultimate in ring sealing making more power!!
• Durabond - cam bearings... 49.99
• Forged steel rods 699.00 FLOATED
• ARP - wavelock - rod bolts... $59.99
• Clevite- -bearings tri metal 77 - rod and main... $99.99
• Hpwards cams custom hi output cam lifter set .. 299.00
• Cloyes - true roller set... $59.99
• Comp - cams cam locks... $4.99
• comp cams xe chrome moly pushrods 99.99
• melling gear race - oil pump... $49.99
• Dyna gear - pickup... $29.99
• ARP - steel drive... $13.99
• After market - oil pan. baffeld 7 qt $99.99
• After market - timing cover... $19.99
• pioneer/arp - head bolts... $59.99
• ARP/ - rocker studs 7/16... 39.99
• Fel Pro blue - gasket sets... 89.99 -TOTAL PARTS YOU COULD SPEND BUILDING YOURSELF4400.00 INC HEADS COST BELOW

Power Making Featured Parts

• ALL NEW PRO RECTANGLE PORT ALUMINUM LARGE OVERSIZE VALVES AND STAGE 1 PORTS REGARDED AS THE BEST POWER FOR STREET/STRIP LOOK AT THESE ADDED FEATURES. Bowls blended, ... $1758 330 RUNNER VOLUME
• Features - - -severe duty STAINLESS 2.25/1.90 valves plus ... 1.50 springs 10 degree super locks comp cam parts..good porting..7/16studs guide plates.gasket match p.c seals.chrome moly retainers.. YOU NEED THIS SIZE VALVE TO MAKE THE POWER ALONG WITH THE CAM!!
• hi perfromance RELIABLE STAINLESS ROLLER rockers-1.7 ratio... $249.99

• custom series--muscle car cam RADICAL IDLE YET FAST THROTTLE RESPONSE HOW MANY ENGINES HAVE THAT !!.MAJOR LOW RPM TORQUE WITH EXTENDED RPM RANGE[1800 THRU 5600] MATCHING POLISHED HI RISE INTAKE OR WEIAND

• Features - 110 center line611 -619 lift corrected 1.7 ratio = . 255/259 dur @ 050 awesome power range 3000 stall. lopey muscle car idle.100% streetable and will run vacum access

• Total parts and labor value = $7895 average retail cost
• primary use hi performance pump gas street

Also a bullet Proof Coan 400 Turbo Racing Transmission W/TRANS BRAKE, 3800 stall Matched Race converter.
I have the receipts showing over 10 Thousand Dollars Spent this year on the Power Plant alone.The Paint is over 25 years old, Still looks good but this is not a show car, It a turn key ready Sleeper/Race car. So it has Scratches and chips, the driver side quarter panel has a small imperfection where the tire caught the body lip,
Buyer are welcome to have the car inspected before he or she decides to purchase it, serious buyers only. A non refundable deposit of 1,000 is required within 24 hours, Buyers are responsible for shipping costs and arrangements, serious buyers can call me at: (252-665-1341). Duke Pratt. Priced to sell for a Good Investment. I need some Garage space.