1964 Chevy C10 Short bed Truck.
1964 Chevrolet C-10
Technical specifications of Chevrolet C-10 1964 | |
---|---|
Price: | - |
Condition: | Used |
Item location: | Jefferson, Maryland, United States |
Make: | Chevrolet |
Model: | C-10 |
Type: | Standard Cab Pickup |
Year: | 1964 |
Mileage: | 999,999 |
VIN: | 4k254b121518 |
Color: | Gray |
Engine size: | 350 |
Number of cylinders: | 8 |
Transmission: | Automatic |
Drive type: | RWD |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Car description |
---|
*NO RESERVE*
Hello all, Unfortunately I have to sell my truck. It has taken many years to get to this point. It is almost finished but now I have neither time nor money to complete it. I will do my best to explain the truck. I'm sure I will forget some things.
1964
GM 350 with a mild cam.Automatic TH400
Runs good. Carb needs adjusted.
Lets start with the things I know it needs.
• Needs the carburetor adjusted for the truck. It was just taken out of the box and put on.
• The Interior needs to be finished. The bench seat in the picture is not mounted.
• The carpet needs to be set.
• The door seals plates need installed.
• The passenger doors needs the dynamat installed and then door panel.
• The truck bed needs adjusted as its sitting high on the passenger side.
• The sensor for the oil pressure gauge needs installed.
• It's really just a bunch of little stuff. If I can think of more to add to the list I will.
The good stuff.
• Just look at the truck, its beautiful.
• It may be easier to talk in person or on the phone about it but here's my best shot at listing all the
details.
• The truck as been completely taken down and put back together.
• Professional body work and paint job. It was close to $15,000
• Has a metal bed instead of a wood bed.
• Painted the inside of the cab with POR15 and then covered with Dynamat.
• Mobsteel 20" wheels
• Dakota Digital gauges
• Lowered the correct way.
• I'll add more info as I remember.
• Here's a list of the receipts that I could find, There's much much more just don't have the
receipts for it.
• Gauge Dimming Kit • $28.45
• Universal Gear Shift Sending unit • 94.95
• Electronic Antenna • 66.45
• GPS Interface • 189.97
• Dakota Digital Gauges • 755.25
• Seatbelt Planet, seat belts and hardware • 128.25
• Mobsteel Wheels • 1,114.00
• Gearshift Knob, Turn signal lever, hazard button, etc. . . • 28.36
• Door screws, wipers blades, misc • 67.88
• Door Panels, ect. . . • 241.12
• Drive Shaft • 205.00
• Door Window glass rubber • 79.99
• Gauge bezel, turn signal switch, headlamp knob, steering wheel, ect. . . • 339.23
• Firewall pad, wiper arms, window regulators, door glass, etc. . ... • 530.59
• Screws, pedal pad kit, etc. . . • 112.30
• Window mirror • 32.04
• Belltech drop shocks, lug nuts, Sanderson headers • 347.68
• DJM Lowering springs • 105.88
• Belltech rear flip kit and shocks • 423.60
• Spark Plugs, distributor, cap and rotor • 57.59
• Headlight Hardware, backup lights, etc. . . • 357.85
• Drop Spindle set • 291.70
• Stainless steel exhaust • 1,200.00
• Tires from Craiglist • 300.00
• Ford Bench seat • 400.00
• Carpet, door sill plate, visors • 371.03
• Amazon: Dynomat, under coat spray, por15 rust preventative. • 300.00
• Kickpanel Vents • 80.00
• Mobsteel Trim rings • 200.00
SELLING AS IS.
I WILL PROVIDE AS MUCH DETAIL ASPOSSIBLE AND ANSWERHONESTLY.
DEPSOSIT REQUIRED WITHIN 48 HOURS.
NOT RESPONSABLE FOR SHIPING.
I RESERVE THE RIGHT TO END THE AUCTION EARLY AS IT LISTED LOCALLY AS WELL.
Hello all, Unfortunately I have to sell my truck. It has taken many years to get to this point. It is almost finished but now I have neither time nor money to complete it. I will do my best to explain the truck. I'm sure I will forget some things.
1964
GM 350 with a mild cam.Automatic TH400
Runs good. Carb needs adjusted.
Lets start with the things I know it needs.
• Needs the carburetor adjusted for the truck. It was just taken out of the box and put on.
• The Interior needs to be finished. The bench seat in the picture is not mounted.
• The carpet needs to be set.
• The door seals plates need installed.
• The passenger doors needs the dynamat installed and then door panel.
• The truck bed needs adjusted as its sitting high on the passenger side.
• The sensor for the oil pressure gauge needs installed.
• It's really just a bunch of little stuff. If I can think of more to add to the list I will.
The good stuff.
• Just look at the truck, its beautiful.
• It may be easier to talk in person or on the phone about it but here's my best shot at listing all the
details.
• The truck as been completely taken down and put back together.
• Professional body work and paint job. It was close to $15,000
• Has a metal bed instead of a wood bed.
• Painted the inside of the cab with POR15 and then covered with Dynamat.
• Mobsteel 20" wheels
• Dakota Digital gauges
• Lowered the correct way.
• I'll add more info as I remember.
• Here's a list of the receipts that I could find, There's much much more just don't have the
receipts for it.
• Gauge Dimming Kit • $28.45
• Universal Gear Shift Sending unit • 94.95
• Electronic Antenna • 66.45
• GPS Interface • 189.97
• Dakota Digital Gauges • 755.25
• Seatbelt Planet, seat belts and hardware • 128.25
• Mobsteel Wheels • 1,114.00
• Gearshift Knob, Turn signal lever, hazard button, etc. . . • 28.36
• Door screws, wipers blades, misc • 67.88
• Door Panels, ect. . . • 241.12
• Drive Shaft • 205.00
• Door Window glass rubber • 79.99
• Gauge bezel, turn signal switch, headlamp knob, steering wheel, ect. . . • 339.23
• Firewall pad, wiper arms, window regulators, door glass, etc. . ... • 530.59
• Screws, pedal pad kit, etc. . . • 112.30
• Window mirror • 32.04
• Belltech drop shocks, lug nuts, Sanderson headers • 347.68
• DJM Lowering springs • 105.88
• Belltech rear flip kit and shocks • 423.60
• Spark Plugs, distributor, cap and rotor • 57.59
• Headlight Hardware, backup lights, etc. . . • 357.85
• Drop Spindle set • 291.70
• Stainless steel exhaust • 1,200.00
• Tires from Craiglist • 300.00
• Ford Bench seat • 400.00
• Carpet, door sill plate, visors • 371.03
• Amazon: Dynomat, under coat spray, por15 rust preventative. • 300.00
• Kickpanel Vents • 80.00
• Mobsteel Trim rings • 200.00
SELLING AS IS.
I WILL PROVIDE AS MUCH DETAIL ASPOSSIBLE AND ANSWERHONESTLY.
DEPSOSIT REQUIRED WITHIN 48 HOURS.
NOT RESPONSABLE FOR SHIPING.
I RESERVE THE RIGHT TO END THE AUCTION EARLY AS IT LISTED LOCALLY AS WELL.