1980 Corvette project

This car is originally from Canada, the speedometer and odometer are in kilometers. It has 90,000 kilometers, roughly 56,000 miles on it. EXTERIOR: The body is straight with no damage to the fiberglass, but there is the typical stress cracks at the corner of the fender seams. The paint is pretty worn, but it has been stored inside. The car came from Canada and is solid underneath. All of the window glass appears to be original and is in excellent shape. The t-tops are in great shape. The tires are the originals and only hold air for a short time. INTERIOR: The interior is in good shape with no major problems. The seat upholstery and door panels show less than normal wear, but it will the carpet. All of the trim pieces are present, but need to be cleaned up. MECHANICAL: The car will start and run, however the numbers matching SBC has been removed and replaced with a rebuilt 90s efi motor with a cam, shorty headers, 4brl aluminum intake, and roller tip rockers. The transmission was rebuilt and only had a few hundred miles on it before the engine change. The engine has 0 miles on it. The brakes were rebuilt before it was parked, but they will need to be checked as the pedal is spongy, im thinking it is just the master cylinder. The steering was gone through at the same time and seems to be functioning as it should. The car has been parked inside my shop since 2005. **NOTE** The car is a project and will need to be trailered.