1964 C-10 Very Original Short Stepside Old Skool Lots of Patina
1964 Chevrolet C-10
Technical specifications of Chevrolet C-10 1964 | |
---|---|
Price: | - |
Condition: | Used |
Item location: | Oak Forest, Illinois, United States |
Make: | Chevrolet |
Model: | C-10 |
SubModel: | Stepside |
Type: | Pickup |
Year: | 1964 |
Mileage: | 0 |
Color: | Blue |
Engine size: | Gasoline |
Number of cylinders: | 6 |
Fuel: | Gasoline |
Transmission: | Manual |
Drive type: | RWD |
Interior color: | Tan |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Car description |
---|
1964 C-10 Very Original Old Skool Short Stepside w/Lots of Patina
Very, very solid old truck from Arkansas with very nice patina
Original straight six with non-original Granny 4 spd. Started out as column 3 spd.
N.O.S. Firestone wide white walls
NEW: Windshield & seal, professionally installed; battery; fuel pump; fuel tank; water pump; radiator hoses; heater hoses; master cylinder and rear brake lines
All tuned up points, plugs, cap, rotor, plug wires and original carb rebuilt
New exhaust w/glass pack, front to back
The truck is licensed, titled, and insured in my name and is driven daily. Just pull the manual choke, turn the key and you're rolling.
I bought the truck to sell so I'm not going to attempt to lower it because it just goes down the road nice the way it is and everybody has a different idea of what they want the truck to be. It does appearlowered in a couple of pictures because I loaded the bed when I cleaned my garage. So you can see what it might look like.
If you're looking for a piece to restore or shop truck to lower, this is it. She can be anything you want.
There is minimal rust in the fender bottoms and cab corners and a couple of holes in the driver's side floor pan, resined and glassed.
The floor supports, body mounts and rockers are all rock solid.
The hood and right side fender was changed out over the years as you can see all the color changes.
Besides the new parts mentioned above, I have the following: Good used 350 auto trans, back to column shift conversion kit from LMC, new drivers floor pan, turn signal canceling cam, new heater defroster duct hoses
Most everything on the truck works, except the gas gauge and speedometer.
It seems like there might be original wood in the bed floor.
The interior is clean and all in tact but needs recovering. All springs and framework are there and functioning including the seat adjustment. Still looks good and presentable with Mexican blanket.
Please check out the YouTubes and all pics. I have plenty more pictures that detail the progress of the work I've done on the truck.
https://youtu.be/t56dlQ8TYtc
https://youtu.be/wZYjXj4tD-g
https://youtu.be/c0KPwBOCNGw
https://youtu.be/N70PhYGQJAA
Calls are preferred but I can text. However I can not and will not carry on a detailed conversation about the truck via text. CALL JIM 773-615-4790(Oak Forest, Illinois)
Very, very solid old truck from Arkansas with very nice patina
Original straight six with non-original Granny 4 spd. Started out as column 3 spd.
N.O.S. Firestone wide white walls
NEW: Windshield & seal, professionally installed; battery; fuel pump; fuel tank; water pump; radiator hoses; heater hoses; master cylinder and rear brake lines
All tuned up points, plugs, cap, rotor, plug wires and original carb rebuilt
New exhaust w/glass pack, front to back
The truck is licensed, titled, and insured in my name and is driven daily. Just pull the manual choke, turn the key and you're rolling.
I bought the truck to sell so I'm not going to attempt to lower it because it just goes down the road nice the way it is and everybody has a different idea of what they want the truck to be. It does appearlowered in a couple of pictures because I loaded the bed when I cleaned my garage. So you can see what it might look like.
If you're looking for a piece to restore or shop truck to lower, this is it. She can be anything you want.
There is minimal rust in the fender bottoms and cab corners and a couple of holes in the driver's side floor pan, resined and glassed.
The floor supports, body mounts and rockers are all rock solid.
The hood and right side fender was changed out over the years as you can see all the color changes.
Besides the new parts mentioned above, I have the following: Good used 350 auto trans, back to column shift conversion kit from LMC, new drivers floor pan, turn signal canceling cam, new heater defroster duct hoses
Most everything on the truck works, except the gas gauge and speedometer.
It seems like there might be original wood in the bed floor.
The interior is clean and all in tact but needs recovering. All springs and framework are there and functioning including the seat adjustment. Still looks good and presentable with Mexican blanket.
Please check out the YouTubes and all pics. I have plenty more pictures that detail the progress of the work I've done on the truck.
https://youtu.be/t56dlQ8TYtc
https://youtu.be/wZYjXj4tD-g
https://youtu.be/c0KPwBOCNGw
https://youtu.be/N70PhYGQJAA
Calls are preferred but I can text. However I can not and will not carry on a detailed conversation about the truck via text. CALL JIM 773-615-4790(Oak Forest, Illinois)