Included in this build are components gathered over a 2 year restoration/build and countless man hours to end up with a high level show/driver truck as this. The components list are as follows...'53 Chevrolet 3600 (3/4 ton) Flatbed Pickup. The Chassis has been Boxed for strength and 8" cut out of the Rear Rails to get the proper wheelbase. 6 cylinder 4 speed. S-10 Sub frame and Mustang II Power Rack and Pinion Steering, ebuilt 350 Vortec Engine with new Oil Pump, omp Cams 270 Roller Camshaft, olished Aluminum Intake with new Edelbrock 1406 Electric Choke - Carb. and New Billet 65,000Volt Distributor. Bill's Hot Rod Shop Brackets, ll Aluminum Pulleys and Aluminum Water Pump, luminum Oil Pan and Flywheel cover, PC Coated S-10 Headers, new 2.5" Aluminized Exhaust with Flow Master Super 40 Mufflers. New Turbo 350 Trans with Lokar Shifter as well as a Custom Made to Order Drive Shaft. Chassis Engineering Triangulated 4 Bar Suspension Rear with Coil over Shocks and 200# Springs. Vintage Air with Heat, /C and Defrost with the latest smaller and nicer looking hose kit (about a $700 Add on to the Kit). New 3 Core Aluminum Radiator and Electric Fan. Viper Red Paint sprayed over the entire exterior. Wet-sanded and Rubbed using 3 separate Compounds and a final Hand Glaze for a Beautiful Shine. Oak Bed Floor with a Medium Stain from Min Wax - Coated with 5 Coats of Min Wax Gloss Polyurethane Clear. Wheels are Boss 338"s, 0"X8.5" . All LED Lights for the Park and Turn Signals to bring the Exterior into the 21st Century. The previous owner discovered it by accident...he went to look at this truck only to take measurements for another 49 Chevy 5 Window that he was still Building. It was on Jack stands in the owners Driveway Covered up with a large Tarp. This was truly a rare find in its original condition since there were no rust spots showing anywhere. He kicked it around for a long time before asking if the truck could be purchased. The seller wanted to know that it was going to be fixed up properly, e assured him he would do right by it. As anyone can see doing right by it is a huge under statement for how this truck came out. Show it or do the cruise in's this one's sure to please!!! 4 miles since build completed