89 jeep wrangler YJ needs motor work Tons of new parts and upgrades
1989 Jeep Wrangler
Technical specifications of Jeep Wrangler 1989 | |
|---|---|
| Price: | - |
| Condition: | Used |
| Item location: | Morrisville, Pennsylvania, United States |
| Make: | Jeep |
| Model: | Wrangler |
| Year: | 1989 |
| Mileage: | NA |
| VIN: | 2j4fy29t0kj134794 |
| Engine size: | 4.2l |
| Number of cylinders: | 6 |
| Transmission: | Automatic |
| Drive type: | 4WD |
| Vehicle Title: | Clear |
| You are interested? | Contact the seller! |
Car description |
|---|
89 yj 4.2l 4x4
4.0 head and header
Intake and exhaust port matched, conversion coolant ports welded and done right (not JBweld)
4.0 tubular header installed.
New Starter less than 50miles
New Electric fan control less than 50 Miles
1.08 autolite carb
Msd 6a
Large ford distributor upgrade
Nutter bypass / emissions deletion
Motor was Rebuild 2k miles ago. Some thing is making noise in bottom end.
New - Crank, Pistons,Performance Cam, Seals, Oil pump, Oil pan, timing set, upgraded valve springs, port polish match head, intake, and exhaust. only thing really reused was the block and connecting arms. Block was rehoned and all tolerances checked.
Column shift 3 speed
Trans-go tf1 heavy duty trans package hold gears at will (manual shift) or autoshift. Ideal for offroad/towing use.
500 miles on trans flush/upgrade/filter/and cooler
Dana 30 front axle manual disconnect
Dana 35 rear axle
Rough country 4.5" lift w/2.0 shocks
2013 Sahara SE wheels (4) 2013 Rubicon mud spare(1)
4.5" to 5.0 adapters 2"thick
Hoop front bumper with tow loops and 12k badlands winch. Winch has 3minutes of use on it. Hasn't been wired up since install to this jeep.
Smitty built rear double tube bumper with 2" receiver
40mm ammo can locking center consol
Paint matched hard top
Paint matched full hard doors
Soft 2 part full doors
Soft half doors
Bikini top with wind hammer
Tanno cover
Extra set of full hard doors
OEM yj wheels (5)
Doorless mirror relocation kit with Harley Davidson mirrors.
I know I'm missing a lot in parts and upgrades to the jeep. It's been an awesome project but I don't have the time to dig into it any more.
I thought the bottom end of the motor was bad, making noise and blowing a lot of smoke from the head.at this point I think it lost a compression ring and is getting bad blow by. Head and gasket are good, distributed and cam aren't wiped out. Will be doing a compression check when I can get a chance. COMPRESSION TEST SHOWS DEFECTIVE RINGS. 1-6 15,90,30,120,120,120. No metal shavings in the oil on last change.
I'm looking for 3k obo on this jeep and parts. Its worth way more in parts then I am asking. This is the jeep for you if you want to do a little work and have a bad ass ride or make some loot by parting it out. I just don't have the time.
Feel free to email me with any questions or to come check it out. It will need to be towed. you will need a truck for the spare parts too
4.0 head and header
Intake and exhaust port matched, conversion coolant ports welded and done right (not JBweld)
4.0 tubular header installed.
New Starter less than 50miles
New Electric fan control less than 50 Miles
1.08 autolite carb
Msd 6a
Large ford distributor upgrade
Nutter bypass / emissions deletion
Motor was Rebuild 2k miles ago. Some thing is making noise in bottom end.
New - Crank, Pistons,Performance Cam, Seals, Oil pump, Oil pan, timing set, upgraded valve springs, port polish match head, intake, and exhaust. only thing really reused was the block and connecting arms. Block was rehoned and all tolerances checked.
Column shift 3 speed
Trans-go tf1 heavy duty trans package hold gears at will (manual shift) or autoshift. Ideal for offroad/towing use.
500 miles on trans flush/upgrade/filter/and cooler
Dana 30 front axle manual disconnect
Dana 35 rear axle
Rough country 4.5" lift w/2.0 shocks
2013 Sahara SE wheels (4) 2013 Rubicon mud spare(1)
4.5" to 5.0 adapters 2"thick
Hoop front bumper with tow loops and 12k badlands winch. Winch has 3minutes of use on it. Hasn't been wired up since install to this jeep.
Smitty built rear double tube bumper with 2" receiver
40mm ammo can locking center consol
Paint matched hard top
Paint matched full hard doors
Soft 2 part full doors
Soft half doors
Bikini top with wind hammer
Tanno cover
Extra set of full hard doors
OEM yj wheels (5)
Doorless mirror relocation kit with Harley Davidson mirrors.
I know I'm missing a lot in parts and upgrades to the jeep. It's been an awesome project but I don't have the time to dig into it any more.
I thought the bottom end of the motor was bad, making noise and blowing a lot of smoke from the head.at this point I think it lost a compression ring and is getting bad blow by. Head and gasket are good, distributed and cam aren't wiped out. Will be doing a compression check when I can get a chance. COMPRESSION TEST SHOWS DEFECTIVE RINGS. 1-6 15,90,30,120,120,120. No metal shavings in the oil on last change.
I'm looking for 3k obo on this jeep and parts. Its worth way more in parts then I am asking. This is the jeep for you if you want to do a little work and have a bad ass ride or make some loot by parting it out. I just don't have the time.
Feel free to email me with any questions or to come check it out. It will need to be towed. you will need a truck for the spare parts too
TONS OF NEW PARTS & UPGRADES, 5 SPEED MAN, DRIVES FANTASTIC, SUPER CLEAN JEEP
Jeep Wrangler on one tons
1979 Jeep CJ7 Original Paint, V8, Locker, Lifted, tons of upgrades
Jeep AMC CJ7, Tons of upgrades, Solid Frame and Body, Emerald Green/ Nutmeg int
Rock crawler 1987 Jeep Wrangler YJ on tons
1988 Jeep Wrangler Laredo in excellent condition with tons of extras