1950 Chevrolet Truck 3100 patina air ride custom

this is a 1950 chevrolet 3100 sitting on chevrolet s-10 frame. the frame was sand blasted primed then coated in ppg pit gaurd. it has full air ride front and rear with a latter bar and pan hard setup in the rear. the air comes frome two compressors and 1 9 gal tank there are 8 valves and 7 switches all 4 corners and front and rear up down and all up and down. all lines fittings and bags are brand new. it has a sbc 350 engine and 700r4 transmission. rear end is from a 61 belair. the wiring is all new from speedway front to back. gauges are (new) not brand new but newer stewart warner all work except speedometer. it is electronic not mechanical so i am waiting on the sending unit to come in. if i get it in time i will put it in if not i will send it with it. all of the wiper motors and linkage is there but never tried them. it has new steering and linkage with power steering. it has electric cooling fan so it never runs hot. brakes are new including lines and hoses. interior is new with hot rod bucket seats and custom center console. had the dash and console hand striped. new carpet and padding on floor. lokar shifter on the floor. new glass and gaskets. it still needs new felt in the window runners in the door. the bed floor has been raised for it to clear the frame and suspension. it has new wood and can be raised to see the air components and suspension. the body is unbelievably solid very small pin holes in the cab corners and none anywhere else. this is the ultimate patina and it is real. i have not done anything but clean it. everywhere i goes and every one who sees it cant believe how even and perfect it is. when all the way down it puts the running boards on the ground. when it is up it has 5 or 6 inches at the lowest. nothing hangs so no worries. contact me at 337-339-1948 Ronnie with questions