1971 Ford Bronco Project,V8

1971 Ford Bronco 4WD Project,289 V8,3 speed,dana 44.This Bronco has been sitting for several years.It was partially disassembled by a previous owner.I was told that he planned on replacing the clutch and doing some general restoration work. The trans and transfer case were removed along with some other items.That is as far as he got and the truck has been sitting outside ever since.I have the trans/t-case,bellhousing,flywheel,crossmember,shifters,etc,etc..There are a pile of parts inside the truck that come with it.I do not have the original front seats but there are a set of bucket seats inside.The rear seat frame is in there and so is the swing out spare tire carrier,etc..The body has the usual Bronco rust issues(see pics).It will need metal work in several areas but it also has a lot of good metal to work with.I have seen muchworse Broncos than this one restored.The front floors have been patched with flat metal.The frame is very solid with only surface rust.The 289 motor can be turned over by hand.I was told that it is the original motor but I cannot guarantee that.I have the "Marti Report" for this Bronco that shows its original configuration,selling dealer, etc..It was a pretty cool truck ordered in Regis Red with a V8 and 4.11 posi,s front and back! I have a clear NJ title in my name. This is a project but most parts are relatively cheap and they are readily available. I don't have to tell you what these early Broncos are worth once they are restored.Of course it is being sold as is. I would like a non refundable deposit of $500.00 within 48hrs and full payment within 7 days.